Knowledge Article: ID B00017104: CMM bay location cannot be determined

Description

The Chassis Management Module (CMM) is unable to determine the CMM bay in which it is installed.

Causes

The Chassis Management Module (CMM) is unable to determine the CMM bay in which it is installed.

Implications

It will default to assume that it is in CMM bay 2.

Resolutions

Complete the following steps:

1. Do not move the CMM to another bay.
   
2. Inspect the CMM connector. If there is no damage, replace the CMM. If there is damage, replace the affected parts.
   

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site. At "IBM Support Portal: Quick start" page, select Browse for "Choose your products", select your Chassis from PureFlex System under the Hardware list, and "Troubleshoot" for "Choose your page", then select "Continue" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.