Knowledge Article: ID B00022008: Primary CMM Ethernet port failed.

Description

Ethernet port on the primary chassis management module has failed.

Causes

The Ethernet connection on the primary Chassis Management Module has been broken.

Implications

The failure generates this event.

Resolutions

Perform these step:

  1. Make sure that the Chassis Management Module is connected to the network and the cable and external switch are functional.

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site. At "IBM Support Portal: Quick start" page, select Browse for "Choose your products", select your Chassis from PureFlex System under the Hardware list, and "Troubleshoot" for "Choose your page", then select "Continue" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "PureSystems" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.