Knowledge Article: ID B00039081: The chassis cooling configuration might not be adequate for node %s.

Description

The chassis cooling configuration might not be adequate for node %s

Causes

There might not be enough available cooling in the chassis for the node.

Implications

There might not be enough available cooling in the chassis for the node.

Resolutions

Perform these steps:

  1. Solve any cooling issues that are reported in the logs, such as a failed fan module.
  2. If applicable, install additional fan modules.
  3. Check the acoustic attenuation setting. You might have to reduce the attenuation level or disable acoustic mode.

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site. At "IBM Support Portal: Quick start" page, select Browse for "Choose your products", select your Chassis from PureFlex System under the Hardware list, and "Troubleshoot" for "Choose your page", then select "Continue" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "PureSystems" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.