Knowledge Article: ID B000FF1BA: Chassis front LED card not present

Description

The front LED card was not detected. The card is attached internally via a ribbon cable to the front of the chassis.

Causes

The front LED card was not detected.

Implications

If the front LED card is disconnected, the LEDs on the front information panel will not work. The chassis LED status is available via the user interface.

Resolutions

Complete the following step:

1. Install or replace the front LED card. Make sure that the front LED card is connected after a maintenance action.
   

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site. At "IBM Support Portal: Quick start" page, select Browse for "Choose your products", select your Chassis from PureFlex System under the Hardware list, and "Troubleshoot" for "Choose your page", then select "Continue" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.