Audiocodes Failed Calls Tel2IP High Treshold Monitor

Audiocodes.GW.Management.Pack.GW.FailCallsTel2IP.HighTreshold.Monitor (UnitMonitor)

This counter is incremented as a result of
calls that fail due to reasons not covered
by the other counters for Tel to IP
direction, during last interval.
EMS Parameter Name: Tel to IP Number
of Failed Calls due to Other reasons

Knowledge Base article:

Summary

This counter is incremented as a result of

calls that fail due to reasons not covered

by the other counters for Tel to IP

direction, during last interval.

EMS Parameter Name: Tel to IP Number

of Failed Calls due to Other reasons

Element properties:

Target

Audiocodes.GW.Management.Pack.GW

Parent Monitor

System.Health.PerformanceState

Category

Custom

Enabled

True

Alert Generate

True

Alert Severity

MatchMonitorHealth

Alert Priority

Normal

Alert Auto Resolve

True

Monitor Type

Audiocodes.GW.Management.Pack.Counter.Cumulative.HighTreshold.MonitorType

Remotable

True

Accessibility

Internal

Alert Message

Audiocodes Failed Calls Tel2IP High Treshold Monitor Alert

Amount of failed calls is {0}

RunAs

Default

Source Code:

<UnitMonitor ID="Audiocodes.GW.Management.Pack.GW.FailCallsTel2IP.HighTreshold.Monitor" Accessibility="Internal" Enabled="true" Target="Audiocodes.GW.Management.Pack.GW" ParentMonitorID="Health!System.Health.PerformanceState" Remotable="true" Priority="Normal" TypeID="Audiocodes.GW.Management.Pack.Counter.Cumulative.HighTreshold.MonitorType" ConfirmDelivery="true">

  <Category>Custom</Category>

  <AlertSettings AlertMessage="Audiocodes.GW.Management.Pack.GW.FailCallsTel2IP.HighTreshold.Monitor_AlertMessageResourceID">

    <AlertOnState>Warning</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Data/Context/Property$</AlertParameter1>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="Audiocodes.GW.Management.Pack.GW.FailCallsTel2IP.HighTreshold.Monitor.MonitorStateHealthy" MonitorTypeStateID="MonitorStateHealthy" HealthState="Success"/>

    <OperationalState ID="Audiocodes.GW.Management.Pack.GW.FailCallsTel2IP.HighTreshold.Monitor.MonitorStateWarning" MonitorTypeStateID="MonitorStateWarning" HealthState="Warning"/>

    <OperationalState ID="Audiocodes.GW.Management.Pack.GW.FailCallsTel2IP.HighTreshold.Monitor.MonitorStateCritical" MonitorTypeStateID="MonitorStateCritical" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <HighWarningLevel>10</HighWarningLevel>

    <HighCriticalLevel>25</HighCriticalLevel>

    <IP>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IP>

    <CommunityString>$RunAs[Name="NetworkLibrary!System.NetworkManagement.Snmp.MonitoringAccount"]/CommunityString$</CommunityString>

    <OID>.1.3.6.1.4.1.5003.10.8.2.52.7.1.3.0</OID>

    <IntervalSeconds>900</IntervalSeconds>

    <SyncTime>12:00</SyncTime>

  </Configuration>

</UnitMonitor>