Home
  •  

Fault Rule : Server.F0383 (Thermal Problem)

Cisco.Imc.Server.F0383.Rule (Rule)

Fault Rule : F0383 (Thermal Problem) Description

Knowledge Base article:

Summary

Power supply [id] in [serverid] temperature: [thermal]

Cause

Thermal-problem

Fault Detail

Description

Fault Code

F0383

Fault Description

Power Supply [Id] temperature is upper critical : Check cooling

Explanation

This fault occurs when the temperature of a PSU module has exceeded a critical threshold value. Be aware of the following possible contributing factors:

  • Temperature extremes can cause Cisco IMC equipment to operate at reduced efficiency and cause a variety of problems, including early degradation, failure of chips, and failure of equipment. In addition, extreme temperature fluctuations can cause CPUs to become loose in their sockets.

  • Cisco IMC equipment should operate in an environment that provides an inlet air temperature not colder than 50F (10C) nor hotter than 95F (35C).

Resolution

If you see this fault, take the following actions:

If the above actions did not resolve the issue, contact Cisco Technical Support

Related Links

Get more details on Cisco IMC faults:

Cisco IMC Faults and Error Messages Reference

Management Pack Information

Cisco IMC Management Pack

Element properties:

TargetCisco.Imc.Server
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityHigh
RemotableTrue
Alert Message
Server.F0383: Thermal Problem

[Group Name:{1}; ServerName:{3}; DN:{2}]
Description: {0}
Event LogCisco UCS Monitoring Service

Member Modules:

ID Module Type TypeId RunAs 
EventProviderDS DataSource Microsoft.Windows.EventProvider Default
GenerateAlert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="Cisco.Imc.Server.F0383.Rule" Enabled="true" Target="Cisco.Imc.Server">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="EventProviderDS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Property[Type="Cisco.Ucs.Object"]/MonitoringServer$</ComputerName>

      <LogName>Cisco UCS Monitoring Service</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[5]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">F0383</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">FaultData</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[2]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">$Target/Property[Type="Cisco.Ucs.Object"]/TypeId$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[3]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">$Target/Property[Type="Cisco.Ucs.Entity"]/UcsName$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[4]</XPathQuery>

              </ValueExpression>

              <Operator>ContainsSubstring</Operator>

              <Pattern>$Target/Property[Type="Cisco.Ucs.Entity"]/Moniker$</Pattern>

            </RegExExpression>

          </Expression>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[15]</XPathQuery>

              </ValueExpression>

              <Operator>ContainsSubstring</Operator>

              <Pattern>$Target/Property[Type="Cisco.Ucs.Object"]/ClassName$</Pattern>

            </RegExExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>2</Priority>

      <Severity>2</Severity>

      <AlertMessageId>$MPElement[Name="Cisco.Imc.Server.F0383.Rule.StringResource"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/Params/Param[1]$</AlertParameter1>

        <AlertParameter2>$Data/Params/Param[14]$</AlertParameter2>

        <AlertParameter3>$Data/Params/Param[7]$</AlertParameter3>

        <AlertParameter4>$Data/Params/Param[3]$</AlertParameter4>

      </AlertParameters>

      <Suppression>

        <SuppressionValue>$Data/Params/Param[8]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[12]$</SuppressionValue>

      </Suppression>

      <Custom1>$Data/Params/Param[2]$</Custom1>

      <Custom2>$Data/Params/Param[14]$</Custom2>

      <Custom3>$Data/Params/Param[6]$</Custom3>

      <Custom4>$Data/Params/Param[5]$</Custom4>

      <Custom5>$Target/Property[Type="Cisco.Ucs.Object"]/WebProxyUrl$</Custom5>

      <!--<Custom6>$Data/Params/Param[9]$</Custom6>-->

      <Custom6>$Data/Params/Param[8]$</Custom6>

      <Custom7>$Data/Params/Param[10]$</Custom7>

      <Custom8>$Data/Params/Param[11]$</Custom8>

      <Custom9>$Data/Params/Param[7]$</Custom9>

      <Custom10>$Data/Params/Param[12]$</Custom10>

    </WriteAction>

  </WriteActions>

</Rule>