Fault Rule : F0396 (Performance Problem) Description
Fan [id] in Fan Module [tray]-[id] under [serverid] speed: [perf]
Performance-problem
Fault Detail | Description |
Fault Code | F0396 |
Fault Description |
|
Explanation | This fault occurs when the fan speed read from the fan controller does not match the desired fan speed and has exceeded the critical threshold and is in risk of failure. This can indicate a problem with a fan or with the reading from the fan controller. |
If you see this fault, take the following actions:
Step 1 Monitor the fan status.
Step 2 If the problem persists for a long period of time or if other fans do not show the same problem, reseat
the fan.
Step 3 Replace the fan module. Prior to replacing this component, see the server specific Installation and
Service Guide for prerequisites, safety recommendations and warnings.
Step 4 If the above actions did not resolve the issue, create a tech-support file and contact Cisco TAC.
If the above actions did not resolve the issue, contact Cisco Technical Support
Get more details on Cisco IMC faults:
Cisco IMC Faults and Error Messages Reference
Cisco IMC Management Pack
Target | Cisco.Imc.Server | ||
Category | Alert | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | High | ||
Remotable | True | ||
Alert Message |
| ||
Event Log | Cisco UCS Monitoring Service |
ID | Module Type | TypeId | RunAs |
---|---|---|---|
EventProviderDS | DataSource | Microsoft.Windows.EventProvider | Default |
GenerateAlert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="Cisco.Imc.Server.F0396.Rule" Enabled="true" Target="Cisco.Imc.Server">
<Category>Alert</Category>
<DataSources>
<DataSource ID="EventProviderDS" TypeID="Windows!Microsoft.Windows.EventProvider">
<ComputerName>$Target/Property[Type="Cisco.Ucs.Object"]/MonitoringServer$</ComputerName>
<LogName>Cisco UCS Monitoring Service</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[5]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">F0396</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">FaultData</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[2]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="Cisco.Ucs.Object"]/TypeId$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[3]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="Cisco.Ucs.Entity"]/UcsName$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[4]</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>$Target/Property[Type="Cisco.Ucs.Entity"]/Moniker$</Pattern>
</RegExExpression>
</Expression>
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[15]</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>$Target/Property[Type="Cisco.Ucs.Object"]/ClassName$</Pattern>
</RegExExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="GenerateAlert" TypeID="Health!System.Health.GenerateAlert">
<Priority>2</Priority>
<Severity>2</Severity>
<AlertMessageId>$MPElement[Name="Cisco.Imc.Server.F0396.Rule.StringResource"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/Params/Param[1]$</AlertParameter1>
<AlertParameter2>$Data/Params/Param[14]$</AlertParameter2>
<AlertParameter3>$Data/Params/Param[7]$</AlertParameter3>
<AlertParameter4>$Data/Params/Param[3]$</AlertParameter4>
</AlertParameters>
<Suppression>
<SuppressionValue>$Data/Params/Param[8]$</SuppressionValue>
<SuppressionValue>$Data/Params/Param[12]$</SuppressionValue>
</Suppression>
<Custom1>$Data/Params/Param[2]$</Custom1>
<Custom2>$Data/Params/Param[14]$</Custom2>
<Custom3>$Data/Params/Param[6]$</Custom3>
<Custom4>$Data/Params/Param[5]$</Custom4>
<Custom5>$Target/Property[Type="Cisco.Ucs.Object"]/WebProxyUrl$</Custom5>
<!--<Custom6>$Data/Params/Param[9]$</Custom6>-->
<Custom6>$Data/Params/Param[8]$</Custom6>
<Custom7>$Data/Params/Param[10]$</Custom7>
<Custom8>$Data/Params/Param[11]$</Custom8>
<Custom9>$Data/Params/Param[7]$</Custom9>
<Custom10>$Data/Params/Param[12]$</Custom10>
</WriteAction>
</WriteActions>
</Rule>