Home
  •  

Fault Rule : Server.F0730 (Thermal Problem)

Cisco.Imc.Server.F0730.Rule (Rule)

Fault Rule : F0730 (Thermal Problem) Description

Knowledge Base article:

Summary

IO Card [location] on [serverid] temperature: [thermal]

Cause

Thermal-problem

Fault Detail

Description

Fault Code

F0730

Fault Description

Adaptor Unit [id] Temperature is critical : Check Cooling

Explanation

This fault occurs when the temperature of an I/O card has exceeded a critical threshold value. Be aware of the following possible contributing factors:

  • Temperature extremes can cause Cisco IMC equipment to operate at reduced efficiency and cause a variety of problems, including early degradation, failure of chips, and failure of equipment. In addition, extreme temperature fluctuations can cause CPUs to become loose in their sockets.

  • Cisco IMC equipment should operate in an environment that provides an inlet air temperature not colder than 50F (10C) nor hotter than 95F (35C).

  • If sensors on a CPU reach 179.6F (82C), the system will take that CPU offline

Resolution

If you see this fault, take the following actions:

If the above actions did not resolve the issue, contact Cisco Technical Support

Related Links

Get more details on Cisco IMC faults:

Cisco IMC Faults and Error Messages Reference

Management Pack Information

Cisco IMC Management Pack

Element properties:

TargetCisco.Imc.Server
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityHigh
RemotableTrue
Alert Message
Server.F0730: Thermal Problem

[Group Name:{1}; ServerName:{3}; DN:{2}]
Description: {0}
Event LogCisco UCS Monitoring Service

Member Modules:

ID Module Type TypeId RunAs 
EventProviderDS DataSource Microsoft.Windows.EventProvider Default
GenerateAlert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="Cisco.Imc.Server.F0730.Rule" Enabled="true" Target="Cisco.Imc.Server">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="EventProviderDS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Property[Type="Cisco.Ucs.Object"]/MonitoringServer$</ComputerName>

      <LogName>Cisco UCS Monitoring Service</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[5]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">F0730</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">FaultData</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[2]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">$Target/Property[Type="Cisco.Ucs.Object"]/TypeId$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[3]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">$Target/Property[Type="Cisco.Ucs.Entity"]/UcsName$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[4]</XPathQuery>

              </ValueExpression>

              <Operator>ContainsSubstring</Operator>

              <Pattern>$Target/Property[Type="Cisco.Ucs.Entity"]/Moniker$</Pattern>

            </RegExExpression>

          </Expression>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[15]</XPathQuery>

              </ValueExpression>

              <Operator>ContainsSubstring</Operator>

              <Pattern>$Target/Property[Type="Cisco.Ucs.Object"]/ClassName$</Pattern>

            </RegExExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>2</Priority>

      <Severity>2</Severity>

      <AlertMessageId>$MPElement[Name="Cisco.Imc.Server.F0730.Rule.StringResource"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/Params/Param[1]$</AlertParameter1>

        <AlertParameter2>$Data/Params/Param[14]$</AlertParameter2>

        <AlertParameter3>$Data/Params/Param[7]$</AlertParameter3>

        <AlertParameter4>$Data/Params/Param[3]$</AlertParameter4>

      </AlertParameters>

      <Suppression>

        <SuppressionValue>$Data/Params/Param[8]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[12]$</SuppressionValue>

      </Suppression>

      <Custom1>$Data/Params/Param[2]$</Custom1>

      <Custom2>$Data/Params/Param[14]$</Custom2>

      <Custom3>$Data/Params/Param[6]$</Custom3>

      <Custom4>$Data/Params/Param[5]$</Custom4>

      <Custom5>$Target/Property[Type="Cisco.Ucs.Object"]/WebProxyUrl$</Custom5>

      <!--<Custom6>$Data/Params/Param[9]$</Custom6>-->

      <Custom6>$Data/Params/Param[8]$</Custom6>

      <Custom7>$Data/Params/Param[10]$</Custom7>

      <Custom8>$Data/Params/Param[11]$</Custom8>

      <Custom9>$Data/Params/Param[7]$</Custom9>

      <Custom10>$Data/Params/Param[12]$</Custom10>

    </WriteAction>

  </WriteActions>

</Rule>