Home
  •  

Fault Rule : FabricInterconnect.F0368 (satellite-mis-connected)

Cisco.Ucsm.FabricInterconnect.F0368.Rule (Rule)

Fault Rule : FabricInterconnect.F0368 (satellite-mis-connected)Description

Knowledge Base article:

Summary

Invalid connection between IOM port [chassisId]/[slotId]/[portId] and fabric interconnect [switchId]:[peerSlotId]/[peerPortId]

Cause

satellite-mis-connected

Fault Detail

Description

Fault Name

Ether Switch Int F Io Satellite Wiring Problem

Fault Code

F0368

Explanation

This fault typically occurs as a result of a satellite wiring problem on the network facing interface of an I/O module and Cisco UCS Manager detects that at least one IOM uplink is misconnected to one of the fabric interconnect ports.

Recommended Actions

If you see this fault, take the following actions:

  • Verify the fabric interconnect chassis topology. Make sure each I/O module is connected to only one fabric interconnect.

  • Ensure that the links are plugged in properly and re acknowledge the chassis.

  • If the above actions did not resolve the issue, create a show tech support file and contact Cisco TAC. Click Here

Related Links

Get more details on Cisco UCS faults:

Cisco UCS Faults and Error Messages Reference

Management Pack Information

Cisco UCS Manager Management Pack

Element properties:

TargetCisco.Ucs.FabricInterconnect
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityHigh
RemotableTrue
Alert Message
FabricInterconnect.F0368: satellite-mis-connected

[Instance Name:{1}; DN:{2}]
Description: {0}
Event LogCisco UCS Monitoring Service

Member Modules:

ID Module Type TypeId RunAs 
EventProviderDS DataSource Microsoft.Windows.EventProvider Default
GenerateAlert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="Cisco.Ucsm.FabricInterconnect.F0368.Rule" Enabled="true" Target="Cisco.Ucs.FabricInterconnect">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="EventProviderDS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Property[Type="Cisco.Ucs.Object"]/MonitoringServer$</ComputerName>

      <LogName>Cisco UCS Monitoring Service</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="UnsignedInteger">17101</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">FaultData</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[2]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">$Target/Property[Type="Cisco.Ucs.Object"]/TypeId$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[7]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">F0368</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[3]</XPathQuery>

              </ValueExpression>

              <Operator>ContainsSubstring</Operator>

              <Pattern>$Target/Property[Type="Cisco.Ucs.Entity"]/Moniker$</Pattern>

            </RegExExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[10]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">$Target/Property[Type="Cisco.Ucs.Object"]/ClassName$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[15]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">AlertGenerated</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>2</Priority>

      <Severity>2</Severity>

      <AlertMessageId>$MPElement[Name="Cisco.Ucsm.FabricInterconnect.F0368.Rule.StringResource"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/Params/Param[1]$</AlertParameter1>

        <AlertParameter2>$Data/Params/Param[24]$</AlertParameter2>

        <AlertParameter3>$Data/Params/Param[3]$</AlertParameter3>

      </AlertParameters>

      <Suppression>

        <SuppressionValue>$Data/Params/Param[2]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[3]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[7]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[9]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[11]$</SuppressionValue>

      </Suppression>

      <Custom1>$Data/Params/Param[2]$</Custom1>

      <Custom2>$Data/Params/Param[5]$</Custom2>

      <Custom3>$Data/Params/Param[14]$</Custom3>

      <Custom4>$Data/Params/Param[7]$</Custom4>

      <Custom5>$Data/Params/Param[8]$</Custom5>

      <Custom6>$Data/Params/Param[9]$</Custom6>

      <Custom7>$Data/Params/Param[24]$</Custom7>

      <Custom8>$Data/Params/Param[11]$</Custom8>

      <!--<Custom9>$Data/Params/Param[12]$</Custom9>-->

      <Custom9>$Data/Params/Param[23]$</Custom9>

      <Custom10>$Data/Params/Param[3]$</Custom10>

    </WriteAction>

  </WriteActions>

</Rule>