Home
  •  

Fault Rule : FabricInterconnect.F1700 (compr-sets-exhausted)

Cisco.Ucsm.FabricInterconnect.F1700.Rule (Rule)

Fault Rule : FabricInterconnect.F1700 (compr-sets-exhausted)Description

Knowledge Base article:

Summary

Network configuration on switch [switchId] resulted in using up ALL of the optimization sets supported by hardware.

Cause

compr-sets-exhausted

Fault Detail

Description

Fault Name

Sw Vlan Port Ns Compressed Sets Exhausted Warning

Fault Code

F1700

Explanation

Cisco UCS Manager raises this fault when the fabric interconnect exhaust all of the Optimizatino sets to be programmed in hardware. This fault does not indicate any problem in the configuration. However, some current or future configuration may cause some error and appropriate alert will be shown. Only when you see any other alters, there could be a cause of concern.

Recommended Actions

If you see this fault, take the following actions:

  • Check if any configuration error is shown in UCSM and take actions recommended by those errors if any.

Related Links

Get more details on Cisco UCS faults:

Cisco UCS Faults and Error Messages Reference

Management Pack Information

Cisco UCS Manager Management Pack

Element properties:

TargetCisco.Ucs.FabricInterconnect
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityWarning
Alert PriorityNormal
RemotableTrue
Alert Message
FabricInterconnect.F1700: compr-sets-exhausted

[Instance Name:{1}; DN:{2}]
Description: {0}
Event LogCisco UCS Monitoring Service

Member Modules:

ID Module Type TypeId RunAs 
EventProviderDS DataSource Microsoft.Windows.EventProvider Default
GenerateAlert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="Cisco.Ucsm.FabricInterconnect.F1700.Rule" Enabled="true" Target="Cisco.Ucs.FabricInterconnect">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="EventProviderDS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Property[Type="Cisco.Ucs.Object"]/MonitoringServer$</ComputerName>

      <LogName>Cisco UCS Monitoring Service</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="UnsignedInteger">17101</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">FaultData</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[2]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">$Target/Property[Type="Cisco.Ucs.Object"]/TypeId$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[7]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">F1700</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[3]</XPathQuery>

              </ValueExpression>

              <Operator>ContainsSubstring</Operator>

              <Pattern>$Target/Property[Type="Cisco.Ucs.Entity"]/Moniker$</Pattern>

            </RegExExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[10]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">$Target/Property[Type="Cisco.Ucs.Object"]/ClassName$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">Params/Param[15]</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">AlertGenerated</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>1</Severity>

      <AlertMessageId>$MPElement[Name="Cisco.Ucsm.FabricInterconnect.F1700.Rule.StringResource"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/Params/Param[1]$</AlertParameter1>

        <AlertParameter2>$Data/Params/Param[24]$</AlertParameter2>

        <AlertParameter3>$Data/Params/Param[3]$</AlertParameter3>

      </AlertParameters>

      <Suppression>

        <SuppressionValue>$Data/Params/Param[2]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[3]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[7]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[9]$</SuppressionValue>

        <SuppressionValue>$Data/Params/Param[11]$</SuppressionValue>

      </Suppression>

      <Custom1>$Data/Params/Param[2]$</Custom1>

      <Custom2>$Data/Params/Param[5]$</Custom2>

      <Custom3>$Data/Params/Param[14]$</Custom3>

      <Custom4>$Data/Params/Param[7]$</Custom4>

      <Custom5>$Data/Params/Param[8]$</Custom5>

      <Custom6>$Data/Params/Param[9]$</Custom6>

      <Custom7>$Data/Params/Param[24]$</Custom7>

      <Custom8>$Data/Params/Param[11]$</Custom8>

      <!--<Custom9>$Data/Params/Param[12]$</Custom9>-->

      <Custom9>$Data/Params/Param[23]$</Custom9>

      <Custom10>$Data/Params/Param[3]$</Custom10>

    </WriteAction>

  </WriteActions>

</Rule>