Citrix NetScaler Appliance Network Interface

ComTrade.Citrix.NetScaler.Appliance.Component.Network.Interface (ClassType)

Citrix NetScaler Appliance network Interface.

Element properties:

Class Hierarchy:

Class Properties:

Property Name	Type	Display Name (ENU)	Description (ENU)	Key	Max Length	Min Length	Case Sensitive
System.Entity:
DisplayName	string	Display Name	Display name of monitoring object.	false	256	0	False
ComTrade.Citrix.NetScaler.Appliance.Component.Base:
HostID	string	MPNS Key	The NetScaler Management Pack key value. It is combination of host id, serial number and NetScaler IP address.	false	256	0	False
IPAddress	string	Device IP Address	The NetScaler Device IP Address.	false	256	0	False
DeviceKey	string	Device Key	The key property of the device node in System Center Operations Manager.	true	256	0	False
ComTrade.Citrix.NetScaler.Appliance.Component.Network.Interface:
autoneg	string	Auto Negotiation	The state of auto negotiation for the specified interface. Possible values are Enabled or Disabled. If auto negotiation is enabled on an interface then that interface tries to auto negotiate the speed and duplex settings with the link partner. If Speed or Duplex are set by the user other then AUTO, than auto negotiation of that parameter does not happen.	false	256	0	False
autonegresult	string	Auto Negotiation Result	Actual auto negotiation setting for this interface.	false	256	0	False
bandwidthhigh	string	Bandwidth High	Configured high threshold of the interface bandwidth usage in Mbits/s. Trap will be sent if bandwidth usage of the interface crosses this limit.	false	256	0	False
bandwidthnormal	string	Bandwidth Normal	Configured normal threshold of the interface bandwidth usage in Mbits/s. Trap will be sent if bandwidth usage of the interface comes back to this limit.	false	256	0	False
conndistr	string	Connection Distribution	Connection distribution setting on this interface.	false	256	0	False
description	string	Description	Gives the information about the device: the type of interface, on which speeds this interface can operate and type of SFP, if applicable.	false	256	0	False
devicename	string	Device Name	Name of the interface.	false	256	0	False
duplex	string	Duplex	The requested duplex mode for the interface. Possible values are: 1. AUTO: Default setting. Indicates that the NetScaler will attempt to auto-negotiate the duplex mode of the interface when it is brought up. 2. HALF 3. FULL For settings other than AUTO, duplex and speed settings should be kept identical at both ends of the link for the it to be up.	false	256	0	False
flags	string	Flags	Flags for this interface. This is used for communicating the device states.	false	256	0	False
flowctl	string	Flow Control	The requested 802. 3x flow control setting for the interface. Possible values are OFF (the default), RX, TX, RXTX, and ON (\"forced RXTX\"). The 802.3x specification does not define flow control for 10 Mbps and 100 Mbps speeds, but if a Gigabit Ethernet interface operates at those speeds, the flow control settings can be applied. The flow control setting that is finally applied to an interface depends on auto-negotiation. With the ON option, auto-negotiation gives the peer the opportunity to negotiate the flow control, but the appliance then forces two-way flow control for the interface. Any other link-parameter mismatches can sometimes cause problems and should be avoided by thoroughly checking the settings. Default value: OFF Possible values = OFF, RX, TX, RXTX.	false	256	0	False
hamonitor	string	HA Monitor	Triggers a failover when the interface on which it is enabled goes down. By default, this option is enabled on all interfaces. It is recommended that this option be disabled on all unused interfaces and other non-critical ones.	false	256	0	False
hangdetect	string	Hang Detection	Hang detection enabled or disabled for this interface.	false	256	0	False
hangreset	string	Hang Reset	Hang reset enabled or disabled for this interface.	false	256	0	False
id	string	ID	The interface number in the a/b format. 'a' can take one of the following values: 1. '0': Indicates a management interface. 2. '1': Indicates a 10/100/1000 Mbps ports and 10G ports of NetScaler 12000-10G and NetScaler MPX 15000 and 17000 platforms. 3. '10': Indicates a 10 Gbps port. 4. 'LA': Indicates a link aggregation port. 5. 'LO': Indicates a loop back port. 'b' is an integer that is used to provide a unique label for the interfaces in the groups defined by 'a'.	true	256	0	False
ifalias	string	Alias Name	The alias name for the interface.	false	256	0	False
lacpkey	string	LACP Key	Identifies the LA channel to which the interface is bound. The possible values are 1, 2, 3, and 4.	false	256	0	False
lacpmode	string	Enable LACP	The LACP mode of the specified interface. The possible values are: 1. Active: A port in active mode will generate LACP protocol messages on a regular basis, regardless of any need expressed by its partner to hear them. 2. Passive: A port in passive mode will generally not transmit LACP messages unless its partner is in the active mode; that is, it will not speak unless spoken to. 3. Disabled: Removes the interface from the LA channel. If this is only interface in the LA channel, the LA channel is also deleted.	false	256	0	False
lacppriority	string	LACP Priority	LACP port priority expressed as an integer ranging from 1 to 65535. The highest priority is 1. The NetScaler limits the number of interfaces in an LA channel to 8. If LACP is enabled on more than 8 interfaces, NetScaler selects 8 interfaces, in descending order of port priority, to form a channel.	false	256	0	False
lacptimeout	string	LACP Timeout	Time to wait for the LACPDU. If a LACPDU is not received within this interval, the NetScaler marks the link partner port as DOWN. Possible values are Long and Short. Long LACP timeout is 90 sec and Short LACP timeout is 3 sec.	false	256	0	False
mac	string	MAC	MAC address for this interface.	false	256	0	False
macdistr	string	MAC Distribution	MAC distribution setting on this interface.	false	256	0	False
mode	string	Mode	Interface Link Aggregation mode(Auto/Manual) setting.	false	256	0	False
mtu	string	MTU	MTU for this interface. It shows the maximum size of frame which can be delivered by this interface.	false	256	0	False
reqduplex	string	Requested Duplex	Requested duplex setting for this interface.	false	256	0	False
reqflowcontrol	string	Requested Flow Control	Requested flow control setting for this interface.	false	256	0	False
reqmedia	string	Requested Media	Requested media setting for this interface.	false	256	0	False
reqspeed	string	Requested Speed	Requested speed setting for this interface.	false	256	0	False
reqthroughput	string	Requested Throughput	Minimum required throughput for an interface. If the interface is a logical interface (LA) and HAMON is ON on that interface then if the operating throughput of that interface falls below this value, failover is triggered.	false	256	0	False
speed	string	Speed	The requested Ethernet speed of the interface. Possible values are: 1. AUTO: Default value. Indicates that the NetScaler will attempt to auto-negotiate or auto-sense the line speed of the interface when it is brought up. 2. 10, 100, 1000, and 10000: 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps respectively. Setting a speed other than AUTO requires the device at the other end of the link to be configured identically. Mismatched speed and duplex settings will lead to link errors, packet loss, etc. Some interfaces do not support certain speeds. When an unsupported speed is set, an error is displayed.	false	256	0	False
tagall	string	Tag All	The option to select whether this port is a trunk port or not for the interface. By default, this is set to OFF for all interfaces. When ON, the traffic will be tagged for all VLANs bound to this interface. If one wants 802.1q behavior with backward compatibility the OFF setting for this variable.	false	256	0	False
tagged	string	Tagged	VLAN tags setting on this channel.	false	256	0	False
taggedany	string	Tagged Any	Interface setting to accept/drop all tagged packets.	false	256	0	False
taggedautolearn	string	Tagged Auto Learn	Dynamic VLAN membership auto learning enabled or disabled on this interface.	false	256	0	False
throughput	string	Throughput	Minimum required throughput for an interface. If the interface is a logical interface (LA) and HAMON is ON on that interface then if the operating throughput of that interface falls below this value, failover is triggered.	false	256	0	False
trunk	string	Trunk	This argument is deprecated by tag all.	false	256	0	False
unit	string	Unit	Unit number for this interface; it shows the sequence number in which this interface is discovered on this NetScaler.	false	256	0	False
vlan	string	VLAN	Native VLAN for this interface.	false	256	0	False
vmac	string	VMAC	Virtual MAC of this interface.	false	256	0	False
vmac6	string	VMAC6	Virtual MAC for IPv6 of this interface.	false	256	0	False

Health Model: