Property Name |
Type |
Display Name (ENU) |
Description (ENU) |
Key |
Max Length |
Min Length |
Case Sensitive |
System.Entity: |
DisplayName |
string |
Display Name |
Display name of monitoring object. |
false | 256 |
0 |
False |
ComTrade.Citrix.NetScaler.Appliance.Component.Base: |
HostID |
string |
MPNS Key |
The NetScaler Management Pack key value. It is combination of host id, serial number and NetScaler IP address. |
false | 256 |
0 |
False |
IPAddress |
string |
Device IP Address |
The NetScaler Device IP Address. |
false | 256 |
0 |
False |
DeviceKey |
string |
Device Key |
The key property of the device node in System Center Operations Manager. |
true | 256 |
0 |
False |
Comtrade.Citrix.NetScaler.Appliance.Component.LoadBalancing.Service: |
name |
string |
Service Name |
The name of the service. |
true | 256 |
0 |
False |
servicetype |
string |
Protocol |
The type of service. The supported protocols are:HTTP - To load balance web servers and provide connection multiplexing, latency improvement, and other content and TCP protection benefits for HTTP traffic.FTP - To load balance FTP servers. In FTP mode, the system provides TCP protection benefits, protection against SYN attacks, and surge protection.TCP - To host any other TCP protocols that are not HTTP, FTP, NNTP, or SSL. In TCP mode, the system provides TCP protection benefits, protection against SYN attack, and surge protection.UDP - To load balance servers with UDP-based services (other than DNS).SSL - To provide end-to-end encryption and SSL acceleration.SSL_BRIDGE - To load balance SSL servers.SSL_TCP - To offload SSL traffic for TCP applications.NNTP - To load balance NNTP servers.DNS - To load balance DNS servers.ADNS: To create an authoritative DNS service.ANY - To load balance a service type not listed above (for example, for IP traffic when load balanci... |
false | 256 |
0 |
False |
port |
string |
Port |
The port number to be used for the service. |
false | 256 |
0 |
False |
cleartextport |
string |
Clear Text Port |
The clear text port number where clear text data is sent. Used with SSL offload service. |
false | 256 |
0 |
False |
gslb |
string |
Gslb |
The GSLB option for the corresponding virtual server. |
false | 256 |
0 |
False |
cachetype |
string |
Cache Type |
The cache type option supported by the cache server. |
false | 256 |
0 |
False |
healthmonitor |
string |
Health Monitor |
Health monitoring state of the service. |
false | 256 |
0 |
False |
maxclient |
string |
Max Clients |
The maximum number of open connections to the service. |
false | 256 |
0 |
False |
maxreq |
string |
Max Requests |
The maximum number of requests that can be sent on a persistent connection to the service. |
false | 256 |
0 |
False |
cacheable |
string |
Cache Redirection |
The virtual server (used in load balancing or content switching) routes a request to the virtual server (used in transparent cache redirection) on the same system before sending it to the configured servers. The virtual server used for transparent cache redirection determines if the request is directed to the cache servers or configured servers.Note: This argument is disabled by default. Do not specify this argument if a -cacheType cacheType is specified. |
false | 256 |
0 |
False |
cip |
string |
Client IP |
The Client IP header insertion option for the service. |
false | 256 |
0 |
False |
cipheader |
string |
Header |
The client IP header. If client IP insertion is enabled and the client IP header is not specified, then the value set by the ###set ns config### command will be used as the Client IP header. |
false | 256 |
0 |
False |
usip |
string |
Use Source IP |
The use of client's IP Address option to the source IP Address while connecting to this server.By default, the system uses a mapped IP address for its server connection; however, you can use this option to tell the system to use the client's IP address when it communicates with the server. |
false | 256 |
0 |
False |
useproxyport |
string |
Use Proxy Port |
When USIP is enabled, based on the setting of this variable proxy port or the client port will be used as the source port for the backend connection. |
false | 256 |
0 |
False |
sp |
string |
Surge Protection |
The state of Surge protection for the the service. |
false | 256 |
0 |
False |
rtspsessionidremap |
string |
Session ID Remapping |
Use this parameter to enable mapping of RTSP sessionid. |
false | 256 |
0 |
False |
clttimeout |
string |
Client idle time-out |
The idle time (in seconds) after which the client connection is terminated. |
false | 256 |
0 |
False |
svrtimeout |
string |
Server idle time-out |
The idle time (in seconds) after which the server connection is terminated. |
false | 256 |
0 |
False |
customserverid |
string |
Server ID |
The identifier for the service. This is used when the persistency type is set to Custom Server ID. |
false | 256 |
0 |
False |
serverid |
string |
ServerID |
The identifier for the service. This is used when the persistency type is set to Custom Server ID. |
false | 256 |
0 |
False |
cka |
string |
Client Keep-Alive |
The state of the Client Keep-Alive feature for the service. |
false | 256 |
0 |
False |
tcpb |
string |
TCP Buffering |
The state of the TCP Buffering feature for the service. |
false | 256 |
0 |
False |
cmp |
string |
Compression |
The state of the HTTP Compression feature for the service. |
false | 256 |
0 |
False |
maxbandwidth |
string |
Max Bandwidth (kbits) |
The maximum bandwidth in kbps allowed for the service. |
false | 256 |
0 |
False |
accessdown |
string |
Access Down |
The option to allow access to disabled or down services. If enabled, all packets to this service are bridged. If disabled, they are dropped. |
false | 256 |
0 |
False |
monthreshold |
string |
Monitor Threshold |
The monitoring threshold. |
false | 256 |
0 |
False |
downstateflush |
string |
Down state flush |
Perform delayed clean up of connections on this service. |
false | 256 |
0 |
False |
ipmapping |
string |
IPMapping |
The permanent mapping for the V6 Address |
false | 256 |
0 |
False |
tcpprofilename |
string |
TCP profile |
The name of the TCP profile. |
false | 256 |
0 |
False |
httpprofilename |
string |
HTTP profile |
Name of the HTTP profile. |
false | 256 |
0 |
False |
hashid |
string |
Hash ID |
The hash identifier for the service. This must be unique for each service. This parameter is used by hash based load balancing methods. |
false | 256 |
0 |
False |
comment |
string |
Comments |
Comments associated with this server. |
false | 256 |
0 |
False |
appflowlog |
string |
AppFlow Logging |
Enable logging appflow flow information |
false | 256 |
0 |
False |
netprofile |
string |
Net Profile |
The name of the network profile. |
false | 256 |
0 |
False |
ipaddress |
string |
IP Address |
The new IP address of the service. |
false | 256 |
0 |
False |
policyname |
string |
Policy Name |
The name of the policyname for which this service is bound |
false | 256 |
0 |
False |
serviceconftype |
string |
Service Config Type |
The configuration type of the service |
false | 256 |
0 |
False |
delay |
string |
Wait Time (seconds) |
The remaining time in seconds for the service to be disabled |
false | 256 |
0 |
False |