EMM Configuration Settings Version Mismatch
The causes and resolutions refer to the Dell Modular Disk Storage Manager recovery guru. Launch Dell Modular Disk Storage Manager to diagnose and fix the recovery failure as follows:
Open Start >> Programs >> Dell >> MD Storage Manager >> Modular Disk Storage Manager Client.
If the MD Storage Array is already being managed by MDSM, you can proceed with the Causes and Resolution sections.
From Edit -> Add Storage Array, provide the IP address of the MD Storage Array and Add it to the discovered devices configuration in order to manage it.
Select the MD Storage Array and follow the steps specified in this recovery guru.
A expansion enclosure in the storage array contains EMMs that are reporting different versions of configuration settings. The Recovery Guru Details area provides specific information you will need as you follow the recovery steps.
Important Note
Normally, the software would resolve the mismatch problem by automatically synchronizing the configuration settings between the two EMMs. However, there are conditions which may cause the automatic synchronization to not occur.
An EMM configuration settings version mismatch can affect how the storage array reports bypassed physical disks, therefore it is important to correct this problem before attempting to correct any problems associated with bypassed physical disks.
1 | From the Array Management Window, select the Upgrade > Enclosure Configuration Settings... option and follow the instructions on the dialog to download the EMM configuration settings configuration file. |
2 | Click the Recheck button to rerun the Recovery Guru. The failure should no longer appear in the Summary area. If the failure appears again, contact your Technical Support Representative. |
| Target | Microsoft.SystemCenter.ManagementServer | ||
| Category | Alert | ||
| Enabled | True | ||
| Alert Generate | True | ||
| Alert Severity | Warning | ||
| Alert Priority | Normal | ||
| Remotable | True | ||
| Alert Message |
|
| ID | Module Type | TypeId | RunAs |
|---|---|---|---|
| DS | DataSource | Microsoft.Windows.ScriptGenerated.EventProvider | Default |
| Alert | WriteAction | System.Health.GenerateAlert | Default |
| WriteToDW | WriteAction | Microsoft.SystemCenter.DataWarehouse.PublishEventData | Default |
Home
<Rule ID="Dell.MDStorageArray.ABBXMLEvent120" Enabled="onEssentialMonitoring" Target="SystemCenter!Microsoft.SystemCenter.ManagementServer" ConfirmDelivery="true" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>Alert</Category>
<DataSources>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.ScriptGenerated.EventProvider">
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<ScriptName>RBODEventGenerator</ScriptName>
<EventNumber>120</EventNumber>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="Alert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>1</Priority>
<Severity>1</Severity>
<AlertMessageId>$MPElement[Name="Dell.MDStorageArray.ABBXMLEvent120.StringResource"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/EventDescription$</AlertParameter1>
</AlertParameters>
<Suppression>
<SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>
<SuppressionValue>$Data/Channel$</SuppressionValue>
<SuppressionValue>$Data/PublisherName$</SuppressionValue>
<SuppressionValue>$Data/LoggingComputer$</SuppressionValue>
<SuppressionValue>$Data/EventCategory$</SuppressionValue>
<SuppressionValue>$Data/EventLevel$</SuppressionValue>
<SuppressionValue>$Data/UserName$</SuppressionValue>
<SuppressionValue>$Data/EventNumber$</SuppressionValue>
<SuppressionValue>$Data/EventDescription$</SuppressionValue>
</Suppression>
<Custom1/>
<Custom2/>
<Custom3/>
<Custom4/>
<Custom5/>
<Custom6/>
<Custom7/>
<Custom8/>
<Custom9/>
<Custom10/>
</WriteAction>
<WriteAction ID="WriteToDW" TypeID="SCDW!Microsoft.SystemCenter.DataWarehouse.PublishEventData"/>
</WriteActions>
</Rule>