Unrecoverable Interrupted Write
The causes and resolutions refer to the Dell Modular Disk Storage Manager recovery guru. Launch Dell Modular Disk Storage Manager to diagnose and fix the recovery failure as follows:
Open Start >> Programs >> Dell >> MD Storage Manager >> Modular Disk Storage Manager Client.
If the MD Storage Array is already being managed by MDSM, you can proceed with the Causes and Resolution sections.
From Edit -> Add Storage Array, provide the IP address of the MD Storage Array and Add it to the discovered devices configuration in order to manage it.
Select the MD Storage Array and follow the steps specified in this recovery guru.
The process of recovering from an interrupted write has failed. The Recovery Guru Details area provides specific information you will need as you follow the recovery steps.
Caution: Risk of Data Loss. Recovery from this problem is a complicated procedure that if done incorrectly could result in the loss of data. Therefore, you should not attempt to perform any recovery steps without the help of your Technical Support Representative.
Important Notes
An interrupted write occurs when power fails or a RAID controller module resets while there is data still in cache.
Normally, when the RAID controller module goes through its initialization, the data still in cache is written to the virtual disks.
An unrecoverable interrupted write occurs when the RAID controller module cannot successfully write the data to one or more of the virtual disks because the disk pool or disk group has failed during initialization. The disk pool or disk group has been placed Offline and its associated physical disks have either been failed or placed Offline. Typically, with an unrecoverable interrupted write, only the virtual disks where the interrupted write occurred will lose data.
1 | Select the Monitor > Health > Collect Support Data... menu option from the Array Management Window, and take the appropriate steps to save the support data to a .zip file. |
2 | Contact your Technical Support Representative and indicate that an "Unrecoverable Interrupted Write" problem is being reported. Send the file you saved in step 1 to your representative and wait for further instruction. |
| Target | Microsoft.SystemCenter.ManagementServer | ||
| Category | Alert | ||
| Enabled | True | ||
| Alert Generate | True | ||
| Alert Severity | Warning | ||
| Alert Priority | Normal | ||
| Remotable | True | ||
| Alert Message |
|
| ID | Module Type | TypeId | RunAs |
|---|---|---|---|
| DS | DataSource | Microsoft.Windows.ScriptGenerated.EventProvider | Default |
| Alert | WriteAction | System.Health.GenerateAlert | Default |
| WriteToDW | WriteAction | Microsoft.SystemCenter.DataWarehouse.PublishEventData | Default |
Home
<Rule ID="Dell.MDStorageArray.ABBXMLEvent14" Enabled="onEssentialMonitoring" Target="SystemCenter!Microsoft.SystemCenter.ManagementServer" ConfirmDelivery="true" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>Alert</Category>
<DataSources>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.ScriptGenerated.EventProvider">
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<ScriptName>RBODEventGenerator</ScriptName>
<EventNumber>14</EventNumber>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="Alert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>1</Priority>
<Severity>1</Severity>
<AlertMessageId>$MPElement[Name="Dell.MDStorageArray.ABBXMLEvent14.StringResource"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/EventDescription$</AlertParameter1>
</AlertParameters>
<Suppression>
<SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>
<SuppressionValue>$Data/Channel$</SuppressionValue>
<SuppressionValue>$Data/PublisherName$</SuppressionValue>
<SuppressionValue>$Data/LoggingComputer$</SuppressionValue>
<SuppressionValue>$Data/EventCategory$</SuppressionValue>
<SuppressionValue>$Data/EventLevel$</SuppressionValue>
<SuppressionValue>$Data/UserName$</SuppressionValue>
<SuppressionValue>$Data/EventNumber$</SuppressionValue>
<SuppressionValue>$Data/EventDescription$</SuppressionValue>
</Suppression>
<Custom1/>
<Custom2/>
<Custom3/>
<Custom4/>
<Custom5/>
<Custom6/>
<Custom7/>
<Custom8/>
<Custom9/>
<Custom10/>
</WriteAction>
<WriteAction ID="WriteToDW" TypeID="SCDW!Microsoft.SystemCenter.DataWarehouse.PublishEventData"/>
</WriteActions>
</Rule>