Dell OM : Power Supply is in warning state (1)

Dell.ManagedServer.Alert.2186 (Rule)

Knowledge Base article:

Summary

Power Supply warning state alert

Causes

Power Supply has generated warning alert. Probable causes and corresponding resolutions for this condition are:

Cause	Resolutions
A predictive failure detected on power supply <number>.	Remove and re-install the power supply at the next service window. If the issue persists, contact technical support. Refer to the product documentation to choose a convenient contact method.
The power input for power supply <number> is outside of the allowable range, but it is attached to the system.	Verify the input power is within the operating requirements for the power supply.
The temperature for power supply <number> is in a warning range.	Check the system operating environment, including airflow and inlet temperature. Check system logs for temperature and thermal component failures.
The power supply <PSU number> is operating but the system cannot get status information.	If problem persist, remove and re-install power supply.
The rating of the power supply unit <PSU number> identified in the message should not exceed system power distribution limits.	Remove the power supply unit identified in the message and review server product documentation for appropriate configuration.

Resolutions

Additional information on this issue may be available. Launch the iDRAC Console to debug further.

Element properties:

Target

Dell.ManagedServer

Category

Alert

Enabled

True

Event_ID

2186

Event Source

LifeCycle Controller Log

Alert Generate

True

Alert Severity

Warning

Alert Priority

Normal

Remotable

True

Alert Message

Dell OM : Power Supply is in warning state (1)

Event Description: {0}

Event Log

System

Member Modules:

ID	Module Type	TypeId	RunAs
DS	DataSource	Microsoft.Windows.EventProvider	Default
Alert	WriteAction	System.Health.GenerateAlert	Default
WriteToDW	WriteAction	Microsoft.SystemCenter.DataWarehouse.PublishEventData	Default

Source Code:

<Rule ID="Dell.ManagedServer.Alert.2186" Enabled="true" Target="DellManagedServer!Dell.ManagedServer" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Property[Type="DellManagedServer!Dell.ManagedServer"]/HostName$</ComputerName>

      <LogName>System</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="UnsignedInteger">2186</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">LifeCycle Controller Log</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>1</Severity>

      <AlertMessageId>$MPElement[Name="Dell.ManagedServer.Alert.2186.Rule"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/EventDescription$</AlertParameter1>

      </AlertParameters>

      <Suppression>

        <SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>

        <SuppressionValue>$Data/Channel$</SuppressionValue>

        <SuppressionValue>$Data/PublisherName$</SuppressionValue>

        <SuppressionValue>$Data/LoggingComputer$</SuppressionValue>

        <SuppressionValue>$Data/EventCategory$</SuppressionValue>

        <SuppressionValue>$Data/EventLevel$</SuppressionValue>

        <SuppressionValue>$Data/UserName$</SuppressionValue>

        <SuppressionValue>$Data/EventNumber$</SuppressionValue>

        <SuppressionValue>$Data/EventDescription$</SuppressionValue>

      </Suppression>

      <Custom1/>

      <Custom2/>

      <Custom3/>

      <Custom4/>

      <Custom5/>

      <Custom6/>

      <Custom7/>

      <Custom8/>

      <Custom9/>

      <Custom10/>

    </WriteAction>

    <WriteAction ID="WriteToDW" TypeID="SCDW!Microsoft.SystemCenter.DataWarehouse.PublishEventData"/>

  </WriteActions>

</Rule>