Dell OM : Power Supply audit failure or critical event.

Dell.ManagedServer.Alert.8329 (Rule)

Knowledge Base article:

Summary

Power Supply audit failure or critical event.

Causes

Cause	Resolution
Unable to set the chassis redundancy policy to AC Redundancy.	Retry the operation using the CMC command line interface or CMC Web interface. To set the chassis redundancy policy using the command line, enter "racadm config -g cfgChassisPower -o cfgChassisRedundancyPolicy 1". To configure the chassis redundancy policy using the Web interface, click Chassis Overview > Power > Configuration. From the Redundancy drop-down menu, select AC Redundancy.
The operation to read the FRU data from the PSU identified in the message did not complete successfully due to internal communication errors.	Retry the operation. If the condition persists, contact your service provider.
The power supply unit (PSU) identified in the message was turned off because the temperature exceeded the high temperature threshold in the unit.	Remove and reinsert the PSU or remove AC power and reapply power to the PSU to get it functional again.

Resolutions

Additional information on this issue may be available. Launch the iDRAC Console to debug further.

Element properties:

Target

Dell.ManagedServer

Category

Alert

Enabled

True

Event_ID

8329

Event Source

LifeCycle Controller Log

Alert Generate

True

Alert Severity

Error

Alert Priority

Normal

Remotable

True

Alert Message

Dell OM : Power Supply audit failure or critical event.

Event Description: {0}

Event Log

System

Member Modules:

ID	Module Type	TypeId	RunAs
DS	DataSource	Microsoft.Windows.EventProvider	Default
Alert	WriteAction	System.Health.GenerateAlert	Default
WriteToDW	WriteAction	Microsoft.SystemCenter.DataWarehouse.PublishEventData	Default

Source Code:

<Rule ID="Dell.ManagedServer.Alert.8329" Enabled="true" Target="DellManagedServer!Dell.ManagedServer" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Property[Type="DellManagedServer!Dell.ManagedServer"]/HostName$</ComputerName>

      <LogName>System</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="UnsignedInteger">8329</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">LifeCycle Controller Log</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>2</Severity>

      <AlertMessageId>$MPElement[Name="Dell.ManagedServer.Alert.8329.Rule"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/EventDescription$</AlertParameter1>

      </AlertParameters>

      <Suppression>

        <SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>

        <SuppressionValue>$Data/Channel$</SuppressionValue>

        <SuppressionValue>$Data/PublisherName$</SuppressionValue>

        <SuppressionValue>$Data/LoggingComputer$</SuppressionValue>

        <SuppressionValue>$Data/EventCategory$</SuppressionValue>

        <SuppressionValue>$Data/EventLevel$</SuppressionValue>

        <SuppressionValue>$Data/UserName$</SuppressionValue>

        <SuppressionValue>$Data/EventNumber$</SuppressionValue>

        <SuppressionValue>$Data/EventDescription$</SuppressionValue>

      </Suppression>

      <Custom1/>

      <Custom2/>

      <Custom3/>

      <Custom4/>

      <Custom5/>

      <Custom6/>

      <Custom7/>

      <Custom8/>

      <Custom9/>

      <Custom10/>

    </WriteAction>

    <WriteAction ID="WriteToDW" TypeID="SCDW!Microsoft.SystemCenter.DataWarehouse.PublishEventData"/>

  </WriteActions>

</Rule>