Dell Server Voltage Sensor Health
Dell Server Voltage Sensor Health unit monitor
Warning
If one or more voltage sensor is in warning state, Causes/resolutions for warning condition:
Cause | Resolutions |
Unable to read <sensor name> sensor value. | Do one of the following to resolve the issue: 1) Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. 2) Re-configure the system to a minimum configuration, and verify if the sensor displays a normal value, otherwise replace the system board. 3) If the sensor identified is a processor voltage sensor, remove the processor module and inspect processor socket, and replace if required. If the issue persists, contact your service provider. |
The <sensor name> sensor state has changed to a warning state with a value of <voltage> Volts. | Do one of the following to resolve the issue: 1) Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. 2) Re-configure the system to a minimum configuration, and verify if the sensor displays a normal value, otherwise replace the system board. 3) If the sensor identified is a processor voltage sensor, remove the processor module and inspect processor socket, and replace if required. If the issue persists, contact your service provider. |
Critical
If one or more voltage sensor is in critical state, Causes/resolutions for Critical condition:
Cause | Resolutions |
The <sensor name> sensor has failed with a value <voltage> Volts. | Do one of the following to resolve the issue: 1) Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. 2) Re-configure the system to a minimum configuration, and verify if the sensor displays a normal value, otherwise replace the system board. 3) If the sensor identified is a processor voltage sensor, remove the processor module and inspect processor socket, and replace if required. If the issue persists, contact your service provider. |
The <sensor name> sensor detected an error with a value of <voltage> Volts. | Do one of the following to resolve the issue: 1) Verify the Embedded System Management (ESM) Log for any sensor related faults. If there is a failed sensor, replace the system board. 2) Re-configure the system to a minimum configuration, and verify if the sensor displays a normal value, otherwise replace the system board. 3) If the sensor identified is a processor voltage sensor, remove the processor module and inspect processor socket, and replace if required. If the issue persists, contact your service provider. |
Additional information on this issue may be available. Launch the iDRAC Console to debug further.
Target | Dell.ManagedServer.VoltageSensor |
Parent Monitor | System.Health.AvailabilityState |
Category | Custom |
Enabled | False |
Alert Generate | False |
Alert Auto Resolve | False |
Monitor Type | Dell.ManagedServer.ServerHealthCookDownUMT |
Remotable | True |
Accessibility | Public |
RunAs | Default |
<UnitMonitor ID="Dell.ManagedServer.VoltageSensorHealth" Accessibility="Public" Enabled="false" Target="DellManagedServer!Dell.ManagedServer.VoltageSensor" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" TypeID="Dell.ManagedServer.ServerHealthCookDownUMT" Priority="Normal" ConfirmDelivery="false">
<Category>Custom</Category>
<OperationalStates>
<OperationalState ID="Success" MonitorTypeStateID="Success" HealthState="Success"/>
<OperationalState ID="Critical" MonitorTypeStateID="Error" HealthState="Error"/>
<OperationalState ID="Warning" MonitorTypeStateID="Warning" HealthState="Warning"/>
</OperationalStates>
<Configuration>
<IntervalSeconds>21600</IntervalSeconds>
<SyncTime/>
<TimeoutSeconds>1200</TimeoutSeconds>
<InstanceIndex>$Target/Property[Type="DellManagedServer!Dell.ManagedServer.VoltageSensor"]/DeviceID$</InstanceIndex>
<ComponentType>Dell.ManagedServer.VoltageSensor</ComponentType>
<LogLevel>0</LogLevel>
</Configuration>
</UnitMonitor>