Dell OM : PCI is in warning state

Dell.Server.OOB.SNMPTrap.2418 (Rule)

Knowledge Base article:

Summary

PCI warning state alert

Causes

PCI has generated warning alert. Probable causes and corresponding resolutions for this condition are:

Cause	Resolutions
Bus performance degraded for a component at bus <bus> device <device> function <func>.	Cycle input power, update component drivers, if device is removable, re-install the device.
Bus performance degraded for a component at slot <number>.	Cycle input power, update component drivers, remove and re-install the device at the next scheduled service time.
A non-fatal PCIe error detected on a component at bus <bus> device <device> function <func>.	Cycle input power, update component drivers, remove and re-install the device at the next service window.
A non-fatal IO error detected on a component at bus <bus> device <device> function <func>.	Cycle input power, update component drivers, remove and re-install the device at the next service window.
The QuickPath Interconnect (QPI) width degraded.	Reset the system, if the problem persists reinstall processors.
A non-fatal PCIe error detected on a component at slot <number>.	Cycle input power, update component drivers, remove and re-install the device at the next scheduled service time.

Resolutions

Additional information on this issue may be available. Launch the iDRAC Console to debug further.

Element properties:

Target

Dell.Server

Category

AvailabilityHealth

Enabled

True

Alert Generate

True

Alert Severity

Warning

Alert Priority

Normal

Remotable

True

Alert Message

Dell OM : PCI is in warning state

Event Description: {0}

Member Modules:

ID	Module Type	TypeId	RunAs
DS	DataSource	System.NetworkManagement.SnmpTrapEventProvider	Default
Alert	WriteAction	System.Health.GenerateAlert	Default
ResolveAlert	WriteAction	Dell.Operations.Server.ResolveAlert.WAT	Default

Source Code:

<Rule ID="Dell.Server.OOB.SNMPTrap.2418" Enabled="true" Target="DellModelServer!Dell.Server" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>AvailabilityHealth</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="NetworkDevice!System.NetworkManagement.SnmpTrapEventProvider">

      <IP>$Target/Property[Type="DellModelServer!Dell.Server"]/RemoteAccessIP$</IP>

      <OIDProps>

        <OIDProp>.1.3.6.1.4.1.674.10892.5.3.2.1.0.2418</OIDProp>

      </OIDProps>

      <EventOriginId>$Target/Id$</EventOriginId>

      <PublisherId>$Target/Id$</PublisherId>

      <PublisherName>iDRAC</PublisherName>

      <Channel>SnmpEvent</Channel>

      <LoggingComputer/>

      <EventNumber>2418</EventNumber>

      <EventCategory>5</EventCategory>

      <EventLevel>10</EventLevel>

      <UserName/>

      <Params/>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="SystemHealth!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>1</Severity>

      <AlertName/>

      <AlertDescription/>

      <AlertOwner/>

      <AlertMessageId>$MPElement[Name="Dell.Server.OOB.SNMPTrap.2418.Rule"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[4]/Value$</AlertParameter1>

      </AlertParameters>

      <Suppression>

        <SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>

        <SuppressionValue>$Data/Channel$</SuppressionValue>

        <SuppressionValue>$Data/PublisherName$</SuppressionValue>

        <SuppressionValue>$Data/LoggingComputer$</SuppressionValue>

        <SuppressionValue>$Data/EventCategory$</SuppressionValue>

        <SuppressionValue>$Data/EventLevel$</SuppressionValue>

        <SuppressionValue>$Data/UserName$</SuppressionValue>

        <SuppressionValue>$Data/EventNumber$</SuppressionValue>

        <SuppressionValue>$Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[3]/Value$</SuppressionValue>

        <SuppressionValue>$Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[4]/Value$</SuppressionValue>

        <SuppressionValue>$Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[6]/Value$</SuppressionValue>

        <SuppressionValue>$Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[8]/Value$</SuppressionValue>

      </Suppression>

      <Custom1>Alert Message ID = $Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[3]/Value$ </Custom1>

      <Custom2>Alert Message = $Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[4]/Value$ </Custom2>

      <Custom3>Alert Status = $Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[5]/Value$ </Custom3>

      <Custom4>Alert Service Tag = $Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[6]/Value$ </Custom4>

      <Custom5>Alert FQDN = $Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[7]/Value$ </Custom5>

      <Custom6>Alert FQDD = $Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[8]/Value$ </Custom6>

      <Custom7/>

      <Custom8/>

      <Custom9/>

      <Custom10/>

    </WriteAction>

    <WriteAction ID="ResolveAlert" TypeID="DellOperationsCommon!Dell.Operations.Server.ResolveAlert.WAT">

      <IP>$Target/Property[Type="DellModelServer!Dell.Server"]/RemoteAccessIP$</IP>

      <MessageID>$Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[3]/Value$</MessageID>

      <FQDN>$Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[7]/Value$</FQDN>

      <FQDD>$Data/EventData/DataItem/SnmpVarBinds/SnmpVarBind[8]/Value$</FQDD>

      <EventNumber>$Data/EventNumber$</EventNumber>

      <Prefix>OOB</Prefix>

    </WriteAction>

  </WriteActions>

</Rule>