This alert is sent when the status of a SCSI Logical Unit(LU) changes.
SCSI Logical Unit(LU) status
unknown(1): The status of this logical unit cannot be determined.
available(2): The logical unit is fully operational (i.e., accepts media access SCSI commands and has no state information to report).
notAvailable(3): The logical unit is capable of being supported but is not available (i.e., no logical unit is currently present or the logical unit is present but not configured for use).
broken(4): The logical unit has failed and cannot respond to SCSI commands.
readying(5): The logical unit is being initialized and access is temporarily limited.
abnormal(6): The logical unit has state information available that indicates it is operating with limits.
To know which status was received refer to the alert context of this alert.
Target | Dell.Storage.EqualLogicEthernetInterface |
Category | AvailabilityHealth |
Enabled | True |
Alert Generate | True |
Remotable | True |
ID | Module Type | TypeId | RunAs |
---|---|---|---|
DS | DataSource | Dell.Storage.EqualLogic.SNMPTrap.DSMT | Default |
Alert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="Dell.Storage.EqualLogicAlert_100" Enabled="onEssentialMonitoring" Target="DAD!Dell.Storage.EqualLogicEthernetInterface" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>AvailabilityHealth</Category>
<DataSources>
<DataSource ID="DS" TypeID="Dell.Storage.EqualLogic.SNMPTrap.DSMT">
<IP>$Target/Property[Type="DAD!Dell.Storage.EqualLogicEthernetInterface"]/IPv4Address$</IP>
<CommunityString>$Target/Host/Host/Host/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayGroup"]/CommunityString$</CommunityString>
<AllTraps>false</AllTraps>
<OIDProps>
<OIDProp>.1.3.6.1.2.1.999.2.0.2</OIDProp>
</OIDProps>
<EventOriginId>$Target/Id$</EventOriginId>
<PublisherId>$Target/Id$</PublisherId>
<PublisherName>EqualLogic SNMP Agent</PublisherName>
<Channel>SnmpEvent</Channel>
<LoggingComputer/>
<EventNumber>100</EventNumber>
<EventCategory>5</EventCategory>
<EventLevel>10</EventLevel>
<UserName/>
<Params/>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="Alert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>1</Priority>
<Severity>$Data/EventData/DataItem/Property[@Name="AlertSeverity"]$</Severity>
<AlertMessageId>$MPElement[Name="Dell.Storage.EqualLogicAlert_100.AlertMessageResourceID"]$</AlertMessageId>
<AlertParameters>
<AlertParameter2>$Data/EventData/DataItem/Property[@Name="Varbind1_desc"]$</AlertParameter2>
</AlertParameters>
<Suppression>
<SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>
<SuppressionValue>$Data/Channel$</SuppressionValue>
<SuppressionValue>$Data/PublisherName$</SuppressionValue>
<SuppressionValue>$Data/LoggingComputer$</SuppressionValue>
<SuppressionValue>$Data/EventCategory$</SuppressionValue>
<SuppressionValue>$Data/EventLevel$</SuppressionValue>
<SuppressionValue>$Data/UserName$</SuppressionValue>
<SuppressionValue>$Data/EventNumber$</SuppressionValue>
<SuppressionValue>$Data/EventDescription$</SuppressionValue>
<SuppressionValue>$Data/EventData/DataItem/Property[@Name="OID_Varbind1"]$</SuppressionValue>
<SuppressionValue>$Data/EventData/DataItem/Property[@Name="Varbind1"]$</SuppressionValue>
<SuppressionValue>$Target/Host/Host/Host/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayGroup"]/groupName$</SuppressionValue>
<SuppressionValue>$Target/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayMember"]/ArrayName$</SuppressionValue>
</Suppression>
<Custom1>Group = $Target/Host/Host/Host/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayGroup"]/groupName$; Member = $Target/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayMember"]/ArrayName$</Custom1>
<Custom2/>
<Custom3/>
<Custom4/>
<Custom5/>
<Custom6/>
<Custom7/>
<Custom8/>
<Custom9/>
<Custom10/>
</WriteAction>
</WriteActions>
</Rule>