Home
  •  

Dell EqualLogic : RAID Set Double Faulted Alert

Dell.Storage.EqualLogicAlert_7 (Rule)

Knowledge Base article:

Summary

RAID set double faulted

Causes

RAID set is detected to have double faulted. Member array will not come up without user intervention

Resolutions

User intervention is required to correct the issue.

Additional information on this issue may be available. Launch the EqualLogic Group Manager GUI to debug further.

Element properties:

TargetDell.Storage.EqualLogicEthernetInterface
CategoryAvailabilityHealth
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityNormal
RemotableTrue
Alert Message
Dell EqualLogic : RAID set Double Faulted Alert
The RAID set has been detected to have double faulted.

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource System.SnmpTrapEventProvider Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="Dell.Storage.EqualLogicAlert_7" Enabled="onEssentialMonitoring" Target="DAD!Dell.Storage.EqualLogicEthernetInterface" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>AvailabilityHealth</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="Snmp!System.SnmpTrapEventProvider">

      <IP>$Target/Property[Type="DAD!Dell.Storage.EqualLogicEthernetInterface"]/IPv4Address$</IP>

      <CommunityString>$Target/Host/Host/Host/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayGroup"]/CommunityString$</CommunityString>

      <AllTraps>false</AllTraps>

      <OIDProps>

        <OIDProp>.1.3.6.1.4.1.12740.2.2.1.7</OIDProp>

      </OIDProps>

      <EventOriginId>$Target/Id$</EventOriginId>

      <PublisherId>$Target/Id$</PublisherId>

      <PublisherName>EqualLogic SNMP Agent</PublisherName>

      <Channel>SnmpEvent</Channel>

      <LoggingComputer/>

      <EventNumber>7</EventNumber>

      <EventCategory>5</EventCategory>

      <EventLevel>10</EventLevel>

      <UserName/>

      <Params/>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="SystemHealth!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>2</Severity>

      <AlertMessageId>$MPElement[Name="Dell.Storage.EqualLogicAlert_7.AlertMessageResourceID"]$</AlertMessageId>

      <AlertParameters/>

      <Suppression>

        <SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>

        <SuppressionValue>$Data/Channel$</SuppressionValue>

        <SuppressionValue>$Data/PublisherName$</SuppressionValue>

        <SuppressionValue>$Data/LoggingComputer$</SuppressionValue>

        <SuppressionValue>$Data/EventCategory$</SuppressionValue>

        <SuppressionValue>$Data/EventLevel$</SuppressionValue>

        <SuppressionValue>$Data/UserName$</SuppressionValue>

        <SuppressionValue>$Data/EventNumber$</SuppressionValue>

        <SuppressionValue>$Data/EventDescription$</SuppressionValue>

        <SuppressionValue>$Target/Host/Host/Host/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayGroup"]/groupName$</SuppressionValue>

        <SuppressionValue>$Target/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayMember"]/ArrayName$</SuppressionValue>

      </Suppression>

      <Custom1>Group = $Target/Host/Host/Host/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayGroup"]/groupName$; Member = $Target/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayMember"]/ArrayName$</Custom1>

      <Custom2/>

      <Custom3/>

      <Custom4/>

      <Custom5/>

      <Custom6/>

      <Custom7/>

      <Custom8/>

      <Custom9/>

      <Custom10/>

    </WriteAction>

  </WriteActions>

</Rule>