Home
  •  

Dell EqualLogic : Both Fan Trays Removed Alert

Dell.Storage.EqualLogicAlert_8 (Rule)

Knowledge Base article:

Summary

Both Fan Trays removed

Causes

Both the fan trays are removed from the chassis.

Resolutions

Replace the fan trays to avoid overheating.

Additional information on this issue may be available. Launch the EqualLogic Group Manager GUI to debug further.

Element properties:

TargetDell.Storage.EqualLogicEthernetInterface
CategoryAvailabilityHealth
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityNormal
RemotableTrue
Alert Message
Dell EqualLogic : Both Fan Trays Removed Alert
Both Fan Trays of the member has been removed from the chassis.

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource System.SnmpTrapEventProvider Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="Dell.Storage.EqualLogicAlert_8" Enabled="onEssentialMonitoring" Target="DAD!Dell.Storage.EqualLogicEthernetInterface" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>AvailabilityHealth</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="Snmp!System.SnmpTrapEventProvider">

      <IP>$Target/Property[Type="DAD!Dell.Storage.EqualLogicEthernetInterface"]/IPv4Address$</IP>

      <CommunityString>$Target/Host/Host/Host/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayGroup"]/CommunityString$</CommunityString>

      <AllTraps>false</AllTraps>

      <OIDProps>

        <OIDProp>.1.3.6.1.4.1.12740.2.2.1.8</OIDProp>

      </OIDProps>

      <EventOriginId>$Target/Id$</EventOriginId>

      <PublisherId>$Target/Id$</PublisherId>

      <PublisherName>EqualLogic SNMP Agent</PublisherName>

      <Channel>SnmpEvent</Channel>

      <LoggingComputer/>

      <EventNumber>8</EventNumber>

      <EventCategory>5</EventCategory>

      <EventLevel>10</EventLevel>

      <UserName/>

      <Params/>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="SystemHealth!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>2</Severity>

      <AlertMessageId>$MPElement[Name="Dell.Storage.EqualLogicAlert_8.AlertMessageResourceID"]$</AlertMessageId>

      <AlertParameters/>

      <Suppression>

        <SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>

        <SuppressionValue>$Data/Channel$</SuppressionValue>

        <SuppressionValue>$Data/PublisherName$</SuppressionValue>

        <SuppressionValue>$Data/LoggingComputer$</SuppressionValue>

        <SuppressionValue>$Data/EventCategory$</SuppressionValue>

        <SuppressionValue>$Data/EventLevel$</SuppressionValue>

        <SuppressionValue>$Data/UserName$</SuppressionValue>

        <SuppressionValue>$Data/EventNumber$</SuppressionValue>

        <SuppressionValue>$Data/EventDescription$</SuppressionValue>

        <SuppressionValue>$Target/Host/Host/Host/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayGroup"]/groupName$</SuppressionValue>

        <SuppressionValue>$Target/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayMember"]/ArrayName$</SuppressionValue>

      </Suppression>

      <Custom1>Group = $Target/Host/Host/Host/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayGroup"]/groupName$; Member = $Target/Host/Host/Property[Type="DAD!Dell.Storage.EqualLogicArrayMember"]/ArrayName$</Custom1>

      <Custom2/>

      <Custom3/>

      <Custom4/>

      <Custom5/>

      <Custom6/>

      <Custom7/>

      <Custom8/>

      <Custom9/>

      <Custom10/>

    </WriteAction>

  </WriteActions>

</Rule>