DELLEMC Enterprise SI LUN Storage Service Node Status

EMC.SI.LunStorageServiceNode.Status.Monitor (UnitMonitor)

This monitor gets the status of LUN Storage Service Node.

Knowledge Base article:

Summary

This monitor reports the availability of LUN service nodes in EMC storage systems. In VNX Block and CX4 storage systems, LUN service nodes are storage processors. On VMAX systems, they are storage directors.

Configuration

See the alert for details about the affected storage processor or director and its health state.

Causes

An unhealthy state can occur if the storage processor or director is not installed correctly or the storage processor hardware or software fails.

Resolutions

Contact DELLEMC Online Support for assistance.

Additional

For more information about this storage system component, refer to your storage system documentation.

External

For more information or technical support, refer to DELLEMC Online Support at support.emc.com.

Element properties:

Target

EMC.SI.LunStorageServiceNode

Parent Monitor

System.Health.AvailabilityState

Category

AvailabilityHealth

Enabled

True

Alert Generate

True

Alert Severity

MatchMonitorHealth

Alert Priority

Normal

Alert Auto Resolve

True

Monitor Type

EMC.SI.Entity.Status.MonitorType

Remotable

True

Accessibility

Public

Alert Message

DELLEMC Enterprise SI LUN Storage Service Node Status

{0} is unhealthy. Health State Details: {1}. Operational Status:{2}.

RunAs

Default

Source Code:

<UnitMonitor ID="EMC.SI.LunStorageServiceNode.Status.Monitor" Accessibility="Public" Enabled="true" Target="ESILib!EMC.SI.LunStorageServiceNode" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="EMC.SI.Entity.Status.MonitorType" ConfirmDelivery="true">

  <Category>AvailabilityHealth</Category>

  <AlertSettings AlertMessage="EMC.SI.LunStorageServiceNode.Status.Monitor_AlertMessageResourceID">

    <AlertOnState>Warning</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Target/Property[Type="ESILib!EMC.SI.StorageDevice"]/DescriptiveId$</AlertParameter1>

      <AlertParameter2>$Data/Context/Property[@Name='HealthStateDetails']$</AlertParameter2>

      <AlertParameter3>$Data/Context/Property[@Name='OperationalStatus']$</AlertParameter3>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="Success" MonitorTypeStateID="Success" HealthState="Success"/>

    <OperationalState ID="Warning" MonitorTypeStateID="Warning" HealthState="Warning"/>

    <OperationalState ID="Error" MonitorTypeStateID="Error" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <ESIServiceHost>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/ESIServiceHost$</ESIServiceHost>

    <Port>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/Port$</Port>

    <ProxyServer>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/ProxyServer$</ProxyServer>

    <BypassList>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/BypassList$</BypassList>

    <IgonreCertificateErrors>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/IgonreCertificateErrors$</IgonreCertificateErrors>

    <HTTPStoHTTPFallBack>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/HTTPStoHTTPFallBack$</HTTPStoHTTPFallBack>

    <UserName>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/UserName$</UserName>

    <Password>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/Password$</Password>

    <HostComponentId>$Target/Property[Type="ESILib!EMC.SI.LunStorageServiceNode"]/ContainerId$</HostComponentId>

    <EntityClass>LunStorageServiceNode</EntityClass>

    <EntityID>$Target/Property[Type="ESILib!EMC.SI.LunStorageServiceNode"]/ServiceNodeId$</EntityID>

    <IntervalSeconds>311</IntervalSeconds>

    <TimeoutSeconds>600</TimeoutSeconds>

    <SyncTime/>

    <DebugLevel>$Target/Property[Type="ESILib!EMC.SI.StorageDevice"]/DebugLevel$</DebugLevel>

  </Configuration>

</UnitMonitor>