DELLEMC Enterprise SI Standby Power Supply Status

EMC.SI.StandbyPowerSupply.Status.Monitor (UnitMonitor)

Monitor the standby power supply status.

Knowledge Base article:

Summary

This monitor reports the availability of standby power supplies in EMC storage system enclosures. Power supplies are components of storage enclosures that convert AC line voltage into DC voltage, which is required for the storage enclosure to operate. They are typically installed in pairs for redundancy.

This monitor will always show as healthy if the target power supply is not a standby power supply.

Configuration

See the alert for details about the power supply locations and states.

Causes

An unhealthy state can occur if a power supply physically fails, is disconnected from line voltage, improperly installed, or removed from a storage enclosure.

Resolutions

Confirm the correct AC line is connected to the power supply and that it is secure in its enclosure.

Additional

For more information about this storage system component, refer to your storage system documentation.

External

For more information or technical support, refer to DELLEMC Online Support at support.emc.com.

Element properties:

Target

EMC.SI.PowerSupply

Parent Monitor

System.Health.AvailabilityState

Category

AvailabilityHealth

Enabled

True

Alert Generate

True

Alert Severity

MatchMonitorHealth

Alert Priority

Normal

Alert Auto Resolve

True

Monitor Type

EMC.SI.Entity.Status.MonitorType

Remotable

True

Accessibility

Public

Alert Message

DELLEMC Enterprise SI Standby Power Supply Status

{0} is unhealthy. Health State Details: {1}. Operational Status:{2}.

RunAs

Default

Source Code:

<UnitMonitor ID="EMC.SI.StandbyPowerSupply.Status.Monitor" Accessibility="Public" Enabled="true" Target="ESILib!EMC.SI.PowerSupply" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="EMC.SI.Entity.Status.MonitorType" ConfirmDelivery="true">

  <Category>AvailabilityHealth</Category>

  <AlertSettings AlertMessage="EMC.SI.StandbyPowerSupply.Status.Monitor_AlertMessageResourceID">

    <AlertOnState>Warning</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Target/Property[Type="ESILib!EMC.SI.StorageDevice"]/DescriptiveId$</AlertParameter1>

      <AlertParameter2>$Data/Context/Property[@Name='HealthStateDetails']$</AlertParameter2>

      <AlertParameter3>$Data/Context/Property[@Name='OperationalStatus']$</AlertParameter3>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="Success" MonitorTypeStateID="Success" HealthState="Success"/>

    <OperationalState ID="Warning" MonitorTypeStateID="Warning" HealthState="Warning"/>

    <OperationalState ID="Error" MonitorTypeStateID="Error" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <ESIServiceHost>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/ESIServiceHost$</ESIServiceHost>

    <Port>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/Port$</Port>

    <ProxyServer>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/ProxyServer$</ProxyServer>

    <BypassList>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/BypassList$</BypassList>

    <IgonreCertificateErrors>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/IgonreCertificateErrors$</IgonreCertificateErrors>

    <HTTPStoHTTPFallBack>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/HTTPStoHTTPFallBack$</HTTPStoHTTPFallBack>

    <UserName>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/UserName$</UserName>

    <Password>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/Password$</Password>

    <HostComponentId>$Target/Host/Property[Type="ESILib!EMC.SI.StorageSystemEnclosure"]/EnclosureId$</HostComponentId>

    <EntityClass>StandbyPowerSupply</EntityClass>

    <EntityID>$Target/Property[Type="ESILib!EMC.SI.PowerSupply"]/PowerSupplyId$</EntityID>

    <IntervalSeconds>307</IntervalSeconds>

    <TimeoutSeconds>600</TimeoutSeconds>

    <SyncTime/>

    <DebugLevel>$Target/Property[Type="ESILib!EMC.SI.StorageDevice"]/DebugLevel$</DebugLevel>

  </Configuration>

</UnitMonitor>