EMC SI Storage Array Status

EMC.SI.StorageArray.Status.Monitor (UnitMonitor)

This monitor gets the status of storage arrays.

Knowledge Base article:

Summary

This monitor reports the availability status of the backend storage arrays in EMC VPLEX appliances.

Configuration

See the alert for details about the location and/or identification information of the affected storage array.

Causes

An unhealthy state of a storage array can occur if the underlying LUNs or physical disks fail.

Resolutions

Confirm the health state of the storage array's components.

Additional

For more information about this storage system component, refer to your storage system documentation.

External

For more information or technical support, refer to EMC Online Support at support.emc.com.

Element properties:

Target

EMC.SI.StorageArray

Parent Monitor

System.Health.AvailabilityState

Category

AvailabilityHealth

Enabled

True

Alert Generate

True

Alert Severity

MatchMonitorHealth

Alert Priority

Normal

Alert Auto Resolve

True

Monitor Type

EMC.SI.Entity.Status.MonitorType

Remotable

True

Accessibility

Public

Alert Message

EMC SI Storage Array Status

{0} is unhealthy. Health State Details: {1}. Operational Status:{2}.

RunAs

Default

Source Code:

<UnitMonitor ID="EMC.SI.StorageArray.Status.Monitor" Accessibility="Public" Enabled="true" Target="ESILib!EMC.SI.StorageArray" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="EMC.SI.Entity.Status.MonitorType" ConfirmDelivery="true">

  <Category>AvailabilityHealth</Category>

  <AlertSettings AlertMessage="EMC.SI.StorageArray.Status.Monitor_AlertMessageResourceID">

    <AlertOnState>Warning</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Target/Property[Type="ESILib!EMC.SI.StorageDevice"]/DescriptiveId$</AlertParameter1>

      <AlertParameter2>$Data/Context/Property[@Name='HealthStateDetails']$</AlertParameter2>

      <AlertParameter3>$Data/Context/Property[@Name='OperationalStatus']$</AlertParameter3>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="Success" MonitorTypeStateID="Success" HealthState="Success"/>

    <OperationalState ID="Warning" MonitorTypeStateID="Warning" HealthState="Warning"/>

    <OperationalState ID="Error" MonitorTypeStateID="Error" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <ESIServiceHost>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/ESIServiceHost$</ESIServiceHost>

    <Port>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/Port$</Port>

    <ProxyServer>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/ProxyServer$</ProxyServer>

    <BypassList>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/BypassList$</BypassList>

    <IgonreCertificateErrors>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/IgonreCertificateErrors$</IgonreCertificateErrors>

    <HTTPStoHTTPFallBack>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/HTTPStoHTTPFallBack$</HTTPStoHTTPFallBack>

    <UserName>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/UserName$</UserName>

    <Password>$Target/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/Password$</Password>

    <HostComponentId>$Target/Host/Property[Type="ESILib!EMC.SI.VplexCluster"]/VplexClusterId$</HostComponentId>

    <EntityClass>StorageArray</EntityClass>

    <EntityID>$Target/Property[Type="ESILib!EMC.SI.StorageArray"]/StorageArrayId$</EntityID>

    <IntervalSeconds>317</IntervalSeconds>

    <TimeoutSeconds>600</TimeoutSeconds>

    <SyncTime/>

    <DebugLevel>$Target/Property[Type="ESILib!EMC.SI.StorageDevice"]/DebugLevel$</DebugLevel>

  </Configuration>

</UnitMonitor>