EMC SI Unclassified Port Status

EMC.SI.UnclassifiedStoragePort.Status.Monitor (UnitMonitor)

Monitor the health status of a Unclassified Storage Port.

Knowledge Base article:

Summary

This monitor reports availability of unclassified ports on EMC storage systems.

Configuration

See the alert for details about the affected unclassified port and the health state of the unclassified port.

Causes

An unhealthy state for a unclassified port can occur if a cable is damaged, a cable is disconnected or the port hardware fails.

Resolutions

Check the unclassified cable and confirm the cable is securely connected on both ends. If a cable issue is indicated, try replacing the cable.

Additional

For more information about this storage system component, refer to your storage system documentation.

External

For more information or technical support, refer to EMC Online Support at support.emc.com.

Element properties:

Target

EMC.SI.UnclassifiedStoragePort

Parent Monitor

System.Health.AvailabilityState

Category

AvailabilityHealth

Enabled

True

Alert Generate

True

Alert Severity

MatchMonitorHealth

Alert Priority

Normal

Alert Auto Resolve

True

Monitor Type

EMC.SI.Entity.Status.MonitorType

Remotable

True

Accessibility

Public

Alert Message

EMC SI Unclassified Port Status

{0} is unhealthy. Health State Details: {1}. Operational Status:{2}.

RunAs

Default

Source Code:

<UnitMonitor ID="EMC.SI.UnclassifiedStoragePort.Status.Monitor" Accessibility="Public" Enabled="true" Target="ESILib!EMC.SI.UnclassifiedStoragePort" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="EMC.SI.Entity.Status.MonitorType" ConfirmDelivery="true">

  <Category>AvailabilityHealth</Category>

  <AlertSettings AlertMessage="EMC.SI.UnclassifiedStoragePort.Status.Monitor_AlertMessageResourceID">

    <AlertOnState>Warning</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Target/Property[Type="ESILib!EMC.SI.StorageDevice"]/DescriptiveId$</AlertParameter1>

      <AlertParameter2>$Data/Context/Property[@Name='HealthStateDetails']$</AlertParameter2>

      <AlertParameter3>$Data/Context/Property[@Name='OperationalStatus']$</AlertParameter3>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="Success" MonitorTypeStateID="Success" HealthState="Success"/>

    <OperationalState ID="Warning" MonitorTypeStateID="Warning" HealthState="Warning"/>

    <OperationalState ID="Error" MonitorTypeStateID="Error" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <ESIServiceHost>$Target/Host/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/ESIServiceHost$</ESIServiceHost>

    <Port>$Target/Host/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/Port$</Port>

    <ProxyServer>$Target/Host/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/ProxyServer$</ProxyServer>

    <BypassList>$Target/Host/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/BypassList$</BypassList>

    <IgonreCertificateErrors>$Target/Host/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/IgonreCertificateErrors$</IgonreCertificateErrors>

    <HTTPStoHTTPFallBack>$Target/Host/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/HTTPStoHTTPFallBack$</HTTPStoHTTPFallBack>

    <UserName>$Target/Host/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/UserName$</UserName>

    <Password>$Target/Host/Host/Host/Host/Property[Type="ESILib!EMC.SI.ESIService"]/Password$</Password>

    <HostComponentId>$Target/Host/Property[Type="ESILib!EMC.SI.LunStorageServiceNode"]/ServiceNodeId$</HostComponentId>

    <EntityClass>UnclassifiedStoragePort</EntityClass>

    <EntityID>$Target/Property[Type="ESILib!EMC.SI.UnclassifiedStoragePort"]/UnclassifiedStoragePortId$</EntityID>

    <IntervalSeconds>311</IntervalSeconds>

    <TimeoutSeconds>600</TimeoutSeconds>

    <SyncTime/>

    <DebugLevel>$Target/Property[Type="ESILib!EMC.SI.StorageDevice"]/DebugLevel$</DebugLevel>

  </Configuration>

</UnitMonitor>