A SCSI tape library has failed.
This could be caused by the following:
Tape Library Status Change. The Storage Agent has detected a change in the status of a tape library. The current tape library status is indicated in the cpqTapeLibraryState variable.
Check the autoloaded unit.
For additional troubleshooting, the following tasks are available:
HPE Device Monitor Console
HPE System Management Homepage
HPE Integrated Lights-Out
The following are monitored NT Event Log entries by this rule:
Event ID | Log File | Publisher | Log Message |
---|---|---|---|
5018 | HPE Device Monitor | HPE Common Services - SNMP | Tape Library Status Change (5018) Tape Library Status Change The Storage Agent has detected a change in the status of a tape library. The current tape library status is indicated in the cpqTapeLibraryState variable. Source IP Address: '%1'; Source System GUID: '%2'; Server Hostname: '%3'; Tape Library Controller Index: '%5'; Tape Library Bus Index: '%6'; Tape Library SCSI ID Index: '%7'; Tape Library LUN Index: '%8'; Tape Library Name: '%9'; Tape Library Firmware Revision: '%10'; Tape Library Serial Number: '%11'; Tape Library State: '%12'; (1=other, 2=ok, 3=degraded, 4=failed, 5=offline) [SNMP TRAP: 5018 in CPQSCSI.MIB] |
See the latest information about the HPE ProLiant VMware Management Pack:
Insight Control for Microsoft System Center documentation
HPE ProLiant VMware Management Pack
Target | HewlettPackard.ProLiant.Monitored.VMware.HPESXServer |
Category | Alert |
Enabled | True |
Alert Generate | True |
Alert Severity | Error |
Alert Priority | High |
Remotable | True |
Event Log | HP Device Monitor |
ID | Module Type | TypeId | RunAs |
---|---|---|---|
DS | DataSource | Microsoft.Windows.EventProvider | Default |
GenerateAlert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="HewlettPackard.ProLiant.Monitored.VMware.SNMP.SCSI_Tape_Library_failed.Rule" Enabled="true" Target="HewlettPackard.ProLiant.Monitored.VMware.HPESXServer">
<Category>Alert</Category>
<DataSources>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">
<ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</ComputerName>
<LogName>HP Device Monitor</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">HP Common Services - SNMP</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">5018</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[2]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="HPSC!HewlettPackard.Servers.HPDMServer"]/SystemUUID$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>2</Priority>
<Severity>2</Severity>
<AlertName>HPE VMware SCSI Tape Library failed.</AlertName>
<AlertDescription>$Data/EventDescription$</AlertDescription>
<AlertOwner/>
<Suppression>
<SuppressionValue/>
</Suppression>
</WriteAction>
</WriteActions>
</Rule>