A storage system temperature has failed.
This could be caused by the following:
Storage System temperature failure. The agent has detected that a temperature status has been set to failed. The storage system will be shut down.
Shut down the storage system as soon as possible. Insure that the storage system environment is cooled properly and that no components are overheated.
For additional troubleshooting, the following tasks are available:
HPE Device Monitor Console
HPE System Management Homepage
HPE Integrated Lights-Out
The following are monitored NT Event Log entries by this rule:
Event ID | Log File | Publisher | Log Message |
---|---|---|---|
8009 | HPE Device Monitor | HPE Common Services - SNMP | Storage System Temperature Failure (8009) Storage System temperature failure. The agent has detected that a temperature status has been set to failed. The storage system will be shut down. User Action: Shut down the storage system as soon as possible. Insure that the storage system environment is being cooled properly and that no components are overheated. Source IP Address: '%1'; Source System GUID: '%2'; Server Hostname: '%3'; Temperature Status: '%5'; (1=other, 2=ok, 3=degraded, 4=failed, 5=noTemp) [SNMP TRAP: 8009 in CPQSTSYS.MIB] |
See the latest information about the HPE ProLiant VMware Management Pack:
Insight Control for Microsoft System Center documentation
HPE ProLiant VMware Management Pack
Target | HewlettPackard.ProLiant.Monitored.VMware.HPESXServer |
Category | Alert |
Enabled | True |
Alert Generate | True |
Alert Severity | Error |
Alert Priority | High |
Remotable | True |
Event Log | HP Device Monitor |
ID | Module Type | TypeId | RunAs |
---|---|---|---|
DS | DataSource | Microsoft.Windows.EventProvider | Default |
GenerateAlert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="HewlettPackard.ProLiant.Monitored.VMware.SNMP.Storage_System_Temperature_failed.Rule" Enabled="true" Target="HewlettPackard.ProLiant.Monitored.VMware.HPESXServer">
<Category>Alert</Category>
<DataSources>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">
<ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</ComputerName>
<LogName>HP Device Monitor</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">HP Common Services - SNMP</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">8009</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[2]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="HPSC!HewlettPackard.Servers.HPDMServer"]/SystemUUID$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>2</Priority>
<Severity>2</Severity>
<AlertName>HPE VMware Storage System Temperature failed.</AlertName>
<AlertDescription>$Data/EventDescription$</AlertDescription>
<AlertOwner/>
<Suppression>
<SuppressionValue/>
</Suppression>
</WriteAction>
</WriteActions>
</Rule>