Home
  •  

HPE Windows (SNMP) Drive Array Physical Drive failed.

HewlettPackard.Servers.ProLiant.SNMP.Drive_Array_Physical_Drive_failed._5_Rule (Rule)

Drive Array Physical Drive failed.

Knowledge Base article:

Summary

The drive array physical drive has failed.

Causes

This could be caused by the following:

Resolutions

If the physical drive status is failed(3) or predictiveFailure(4), replace the physical drive.

For additional troubleshooting, the following tasks are available:

Related Events

The following are monitored NT Event Log entries by this rule:

Event ID

Publisher

Log Message

1064

Storage Agents

Drive Array Physical Drive Status Change. The physical drive in slot %4, port %5, bay %6 with serial number "%7", has a new status of %2.
(Drive status values: 1=other, 2=ok, 3=failed, 4=predictiveFailure, 5=erasing, 6=eraseDone, 7=eraseQueued, 8=ssdWearOut, 9=notAuthenticated)
[SNMP TRAP: 3029 in CPQIDA.MIB]

1061

Storage Agents

Drive Array Physical Drive Threshold Exceeded. The physical drive in slot %4, port %5, bay %6 with serial number "%7", has exceeded a drive threshold.
[SNMP TRAP: 3030 in CPQIDA.MIB]

Related Links

See the latest information about HPE ProLiant Management Packs:

Insight Control for Microsoft System Center documentation

Management Pack Information

HPE ProLiant Servers SNMP Management Pack

Element properties:

TargetHewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPServerStorage
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityHigh
RemotableTrue
Event LogSystem
CommentMom2005ID='{472B282C-40BF-4F36-9C8E-FD154191F0A2}'

Member Modules:

ID Module Type TypeId RunAs 
_907D4578_146C_11D3_AB21_00A0C98620CE_ DataSource Microsoft.Windows.EventProvider Default
GenerateAlert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="HewlettPackard.Servers.ProLiant.SNMP.Drive_Array_Physical_Drive_failed._5_Rule" Target="HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPServerStorage" Enabled="true" Comment="Mom2005ID='{472B282C-40BF-4F36-9C8E-FD154191F0A2}'">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="_907D4578_146C_11D3_AB21_00A0C98620CE_" Comment="{907D4578-146C-11D3-AB21-00A0C98620CE}" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</ComputerName>

      <LogName>System</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value>Storage Agents</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>EventLevel</XPathQuery>

              </ValueExpression>

              <Operator>LessEqual</Operator>

              <ValueExpression>

                <Value>2</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery>EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>MatchesMOM2005BooleanRegularExpression</Operator>

              <Pattern>^(1064|1061)$</Pattern>

            </RegExExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">

      <Priority>2</Priority>

      <Severity>2</Severity>

      <AlertName>HPE Windows (SNMP) Drive Array Physical Drive failed.</AlertName>

      <AlertDescription>$Data/EventDescription$</AlertDescription>

      <AlertOwner/>

      <Suppression>

        <SuppressionValue/>

      </Suppression>

    </WriteAction>

  </WriteActions>

</Rule>