Home
  •  

HPE Windows (SNMP) SCSI Controller failed.

HewlettPackard.Servers.ProLiant.SNMP.SCSI_Controller_failed._5_Rule (Rule)

SCSI Controller failed.

Knowledge Base article:

Summary

The SCSI controller has failed.

Causes

This could be caused by the following:

Resolutions

Check the controller state in the event description. If failed(3), run diagnostics on the computer system to help identify the problem. If other(1), check for diagnostic messages which might have occurred at system boot time.

For additional troubleshooting, the following tasks are available:

Related Events

The following are monitored NT Event Log entries by this rule:

Event ID

Publisher

Log Message

1068

Storage Agents

SCSI Controller Status Change. The SCSI controller in slot %4, SCSI bus %5 has a new status of %2.
(Controller status values: 1=other, 2=ok, 3=failed)
[SNMP TRAP: 5005 in CPQSCSI.MIB]

Related Links

See the latest information about HPE ProLiant Management Packs:

Insight Control for Microsoft System Center documentation

Management Pack Information

HPE ProLiant Servers SNMP Management Pack

Element properties:

TargetHewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPServerStorage
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityHigh
RemotableTrue
Event LogSystem
CommentMom2005ID='{C72E9D7F-E48E-4F92-BEBC-83BDC866F835}'

Member Modules:

ID Module Type TypeId RunAs 
_907D4578_146C_11D3_AB21_00A0C98620CE_ DataSource Microsoft.Windows.EventProvider Default
GenerateAlert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="HewlettPackard.Servers.ProLiant.SNMP.SCSI_Controller_failed._5_Rule" Target="HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPServerStorage" Enabled="true" Comment="Mom2005ID='{C72E9D7F-E48E-4F92-BEBC-83BDC866F835}'">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="_907D4578_146C_11D3_AB21_00A0C98620CE_" Comment="{907D4578-146C-11D3-AB21-00A0C98620CE}" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</ComputerName>

      <LogName>System</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value>Storage Agents</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>EventLevel</XPathQuery>

              </ValueExpression>

              <Operator>LessEqual</Operator>

              <ValueExpression>

                <Value>2</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value>1068</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">

      <Priority>2</Priority>

      <Severity>2</Severity>

      <AlertName>HPE Windows (SNMP) SCSI Controller failed.</AlertName>

      <AlertDescription>$Data/EventDescription$</AlertDescription>

      <AlertOwner/>

      <Suppression>

        <SuppressionValue/>

      </Suppression>

    </WriteAction>

  </WriteActions>

</Rule>