Home
  •  

HPE Windows (SNMP) Storage System Temperature failed.

HewlettPackard.Servers.ProLiant.SNMP.Storage_System_Temperature_failed._5_Rule (Rule)

Storage System Temperature failed.

Knowledge Base article:

Summary

The storage system temperature has failed.

Causes

This could be caused by the following:

Resolutions

Shut down the storage system as soon as possible. Insure that the storage system environment is being cooled properly and that no components are overheated.

For additional troubleshooting, the following tasks are available:

Related Events

The following are monitored NT Event Log entries by this rule:

Event ID

Publisher

Log Message

1076

Storage Agents

Storage System Temperature Failure. The %6 %7 storage system connected to SCSI bus %5 of the controller in slot %4 has a failed temperature status. Shutdown the storage system as soon as possible.
[SNMP TRAP: 8009 in CPQSTSYS.MIB]

Related Links

See the latest information about HPE ProLiant Management Packs:

Insight Control for Microsoft System Center documentation

Management Pack Information

HPE ProLiant Servers SNMP Management Pack

Element properties:

TargetHewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPServerStorage
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityWarning
Alert PriorityHigh
RemotableTrue
Event LogSystem
CommentMom2005ID='{B162768F-3968-41F2-AA83-CD65AEE23AF0}'

Member Modules:

ID Module Type TypeId RunAs 
_907D4578_146C_11D3_AB21_00A0C98620CE_ DataSource Microsoft.Windows.EventProvider Default
GenerateAlert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="HewlettPackard.Servers.ProLiant.SNMP.Storage_System_Temperature_failed._5_Rule" Target="HewlettPackard.Servers.ProLiant.SNMP.HPProLiantSNMPServerStorage" Enabled="true" Comment="Mom2005ID='{B162768F-3968-41F2-AA83-CD65AEE23AF0}'">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="_907D4578_146C_11D3_AB21_00A0C98620CE_" Comment="{907D4578-146C-11D3-AB21-00A0C98620CE}" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</ComputerName>

      <LogName>System</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value>Storage Agents</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>EventLevel</XPathQuery>

              </ValueExpression>

              <Operator>LessEqual</Operator>

              <ValueExpression>

                <Value>2</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value>1076</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">

      <Priority>2</Priority>

      <Severity>1</Severity>

      <AlertName>HPE Windows (SNMP) Storage System Temperature failed.</AlertName>

      <AlertDescription>$Data/EventDescription$</AlertDescription>

      <AlertOwner/>

      <Suppression>

        <SuppressionValue/>

      </Suppression>

    </WriteAction>

  </WriteActions>

</Rule>