SAS/SATA logical drive degreaded monitor for System Center Virtual Machine Manager (VMM) Performance and Resource Optimization (PRO).
This monitor detects a degraded SAS/SATA logical drive event from the HPE Insight Management Agents on the host.
A SAS/SATA logical drive error has been detected. The SAS/SATA logical drive has had a change in status.
The faulty SAS/SATA logical drive needs to be replaced on the host system. To continue running virtual machines, migrate all virtual machines to other hosts in the cluster. To have HPE PRO migrate the virtual machines, click Implement. After the implementation, HPE PRO will remove the host from the virtual machine placement. To ignore this PRO Tip, click Dismiss and perform a manual reset of the original monitor. If the message HPE PRO: SAS/SATA logical drive degraded appears in the Health Explorer Operations Manager console, consult the user guide for instructions.
This monitor can be overridden to change virtual machine move modes such as QuickMove or LANMove. QuickMove restricts the operation to cluster-based hosts and is designed to be used for critical state situations. To change the move mode, go to the Diagnostic and Recovery tab in the Properties view of this monitor, click Edit, and override MoveMode by carefully replacing the string with QuickMove or LANMove. These steps can be used for both Diagnostics and Recovery.
This monitor is designed with a manual reset type. The PRO Implementation process will auto-reset the monitor after all migration is successfully completed, but the PRO Dismiss command will not reset the monitor. Manual reset is required to detect new alerts. To reset the monitor, go to the Health Explorer Operations Manager, right click on the monitor, and then select Reset Health.
Target | HewlettPackard.Servers.ProLiant.SNMPPRO.ManagedHost | ||
Parent Monitor | System.Health.AvailabilityState | ||
Category | Custom | ||
Enabled | False | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | Microsoft.Windows.SingleEventLogManualReset2StateMonitorType | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="HewlettPackard.Servers.ProLiant.SNMPPRO.SAS_SATA_logical_drive_degraded.Monitor" Accessibility="Public" Enabled="false" Target="HewlettPackard.Servers.ProLiant.SNMPPRO.ManagedHost" ParentMonitorID="SystemHealth!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Windows!Microsoft.Windows.SingleEventLogManualReset2StateMonitorType" ConfirmDelivery="true">
<Category>Custom</Category>
<AlertSettings AlertMessage="HewlettPackard.Servers.ProLiant.SNMPPRO.SAS_SATA_logical_drive_degraded.Monitor.AlertMessageID">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/EventDescription$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="EventRaised" MonitorTypeStateID="EventRaised" HealthState="Error"/>
<OperationalState ID="EventReset" MonitorTypeStateID="ManualResetEventRaised" HealthState="Success"/>
</OperationalStates>
<Configuration>
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<LogName>System</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">Storage Agents</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">1222</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[6]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</And>
</Expression>
</Configuration>
</UnitMonitor>