HPE Virtual Connect FC Uplink Port has failed
HPE Virtual Connect FC uplink port has failed
This could be caused by the following:
The FC uplink port reported a failed state. The overall status of the connectivity unit has changed.
Ensure the link is up and connected to the Uplink Port. For more details, refer the Related Events Section.
For additional troubleshooting, the following tasks are available:
HPE Virtual Connect Manager
HPE Device Monitor Console
The following are monitored NT Event Log entries by this rule:
Event ID | Log File | Publisher | Log Message |
---|---|---|---|
7800 | HPE Device Monitor | HPE Common Services - SNMP VC | VC FC Uplink Port (7800) is down. This trap is sent when VC FC Uplink Port has changed from Normal to Error. Source IP Address: '%1'; Domain ID: '%4'; Domain Name: '%5'; PortIndex:'%9' |
See latest information of Virtual Connect Management Pack:
HPE Microsoft Management Integration Solution
HPE Virtual Connect Management Pack
Target | HewlettPackard.Servers.VirtualConnect.HPVirtualConnectDomain |
Category | Alert |
Enabled | True |
Alert Generate | True |
Alert Severity | Error |
Alert Priority | High |
Remotable | True |
Event Log | HP Device Monitor |
ID | Module Type | TypeId | RunAs |
---|---|---|---|
DS | DataSource | Microsoft.Windows.EventProvider | Default |
GenerateAlert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="HewlettPackard.Servers.VC.SNMP.VCFC_Module_Port_Failed_Rule" Enabled="true" Target="HewlettPackard.Servers.VirtualConnect.HPVirtualConnectDomain" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>Alert</Category>
<DataSources>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">
<ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</ComputerName>
<LogName>HP Device Monitor</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">HP Common Services - SNMP VC</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">7800</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[4]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="HewlettPackard.Servers.VirtualConnect.HPVirtualConnectDomain"]/DomainID$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventLevel</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">1</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>2</Priority>
<Severity>2</Severity>
<AlertName>HPE Virtual Connect FC Uplink Port has failed</AlertName>
<AlertDescription>$Data/EventDescription$</AlertDescription>
<AlertOwner/>
<Suppression>
<SuppressionValue>$Data/Params/Param[1]$</SuppressionValue>
<SuppressionValue>$Data/Params/Param[9]$</SuppressionValue>
</Suppression>
<Custom1>$Data/Params/Param[1]$</Custom1>
<Custom2>$Data/Params/Param[2]$</Custom2>
<Custom3>$Data/Params/Param[3]$</Custom3>
<Custom4>$Data/Params/Param[4]$</Custom4>
<Custom5>$Data/Params/Param[5]$</Custom5>
</WriteAction>
</WriteActions>
</Rule>