Home
  •  

Disk enclosure temperature exceeds the upper limit.

Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000F0CE0005 (Rule)

Knowledge Base article:

Alert ID

0x000F0CE0005

Resolutions

Step1 Check whether alarms are generated indicating fan module faults.

1.1 If yes, replace the faulty fan modules. If alarm Disk Enclosure Temperature Exceeds the Upper Limit persists=>[Step2].

1.2 If no=>[Step2].

Step2 Check whether heat dissipation channels in the disk enclosure are blocked.

2.1 If yes, clear the heat dissipation channels. If alarm Disk Enclosure Temperature Exceeds the Upper Limit persists=>[Step3].

2.2 If no=>[Step3].

Step3 Check whether the ambient temperature is too high.

3.1 If yes, lower the existing air conditioners temperature or add more air conditioners. If alarm Disk Enclosure Temperature Exceeds the Upper Limit persists=>[Step4].

3.2 If no=>[Step4].

Step4 Collect related information and contact technical support engineers.

Element properties:

TargetHuawei.ISM.Management.Pack.huawei.Class.Device
CategoryNone
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityHigh
RemotableTrue
Alert Message
Disk enclosure temperature exceeds the upper limit.
{0}

Member Modules:

ID Module Type TypeId RunAs 
DS1 DataSource MPAuthor.ExpressionFilter.ScheduledProbeDS Default
filterCD0x000F0CE0005 ConditionDetection System.ExpressionFilter Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000F0CE0005" Target="Huawei.ISM.Management.Pack.huawei.Class.Device" Enabled="true" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>None</Category>

  <DataSources>

    <DataSource ID="DS1" TypeID="MPAuthor.ExpressionFilter.ScheduledProbeDS">

      <Interval>14400</Interval>

      <SyncTime/>

    </DataSource>

  </DataSources>

  <ConditionDetection ID="filterCD0x000F0CE0005" TypeID="System!System.ExpressionFilter">

    <Expression>

      <And>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Property[@Name='alarmId']</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value>4040032261</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Property[@Name='category']</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value>1</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

      </And>

    </Expression>

  </ConditionDetection>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>2</Priority>

      <Severity>2</Severity>

      <AlertMessageId>$MPElement[Name="Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000F0CE0005.AlertMessage"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/Property[@Name='detail']$</AlertParameter1>

        <AlertParameter2>$Data/Property[@Name='alarmId']$</AlertParameter2>

      </AlertParameters>

      <Custom1>$Data/Property[@Name='eventSequence']$</Custom1>

    </WriteAction>

  </WriteActions>

</Rule>