Alert monitor for Lenovo BladeCenter Open Fabric Manager configuration cleared
IBM.BladeCenter.OFMConfig.Cleared (UnitMonitor)
Alert monitor for Lenovo BladeCenter Open Fabric Manager configuration cleared
Knowledge Base article:
Summary
This monitor watches for a BladeCenter event that indicates that
an Open Fabric Manager configuration has been cleared.
Configuration
You can disable this monitor through the Operations Manager's Operations
Console. See the "Disable monitors" topic in the Operations Manager's
Operations User's Guide for more information.
The BladeCenter event is delivered to this monitor asynchronously.
There is no monitoring interval to configure for this monitor.
The BladeCenter event is delivered to this monitor from the AMM (Advanced
Management Module) of the BladeCenter via the SNMP (Simple Network Management
Protocol) protocol. It also goes through the BladeCenter runtime support
of the Hardware Management Pack installed on the management server that
was designated to manage the BladeCenter during the Network Device Discovery process.
For the proper BladeCenter AMM SNMP settings that are required for
the Hardware Management Pack to discover BladeCenter modules
and report events, consult the Hardware Management Pack's User's Guide.
Causes
When an Open Fabric Manager configuration has been cleared,
the BladeCenter's AMM generates a hardware event.
The health state of this monitor is then set to the Critical or Warning state.
For a particular incident, review the history in the State Changes tab. Consult the relevant hardware
knowledge articles listed below, keeping in mind the relevant event data.
The relevant Lenovo hardware knowledge articles are available on a system with the Lenovo Hardware Management Pack
package installed.
Open Fabric Manager configuration was cleared, because the AMM was moved to a new chassis or restored to default
Resolutions
Review the relevant Lenovo hardware knowledge articles listed above for information about how to resolve the
hardware problem for a particular incident.
When an Open Fabric Manager configuration has been cleared,
the monitor generates an alert when its health state changes to either Critical or Warning.
After this configuration issue is resolved,
manually reset the health state of this monitor.
See the "Reset Health" topic in the Operations Manager's Operations User's Guide for more information.
Any outstanding corresponding alerts will be automatically closed when the health state
of this monitor returns to the Healthy state.
Home
ENU