Message Queuing failed to listen on the IPv6 protocol. Messages will not be accepted on IPv6.
Message Queuing failed to listen on the IPv6 protocol. Messages will not be accepted on IPv6.
Message Queuing is not able to listen to messages on IP version 6 (IPv6). This problem might be caused by one of the following:
IPv6 is not supported.
IPv6 is not Installed
IPv6 is not supported
Contact your domain administrator to find out if IPv6 can be installed on this computer, because your hardware or software may not support IPv6.
IPv6 is not Installed
To enable the protocol yourself or to determine whether it is supported:
Open Control Panel. To open Control Panel, click Start, and then click Control Panel.
Double-click Network and Sharing Center.
In the Tasks section, click Manage Network Connections.
In Network Connections, right-click the local area network (LAN) icon or your appropriate network controller, and then click Properties.
On the Networking tab, make sure that the Internet Protocol Version 6 (TCP/IPv6) check box is selected.
For more information, see Event ID 2197 ( http://technet.microsoft.com/en-us/library/dd337400(WS.10).aspx)
| Target | Microsoft.MSMQ.6.2.Servers | ||
| Category | AvailabilityHealth | ||
| Enabled | False | ||
| Event_ID | 2197 | ||
| Event Source | $Target/Property[Type="Microsoft.MSMQ.6.2.ServerRole"]/ServiceName$ | ||
| Alert Generate | True | ||
| Alert Severity | Warning | ||
| Alert Priority | Normal | ||
| Remotable | True | ||
| Alert Message |
| ||
| Event Log | Application |
| ID | Module Type | TypeId | RunAs |
|---|---|---|---|
| DS | DataSource | Microsoft.Windows.EventProvider | Default |
| Alert | WriteAction | System.Health.GenerateAlert | Default |
Home
<Rule ID="Microsoft.MSMQ.6.2.Rule.Alert.Event2197" Enabled="false" Target="Microsoft.MSMQ.6.2.Servers" ConfirmDelivery="true" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>AvailabilityHealth</Category>
<DataSources>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<LogName>Application</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">2197</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="Microsoft.MSMQ.6.2.ServerRole"]/ServiceName$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="Alert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>1</Priority>
<Severity>1</Severity>
<AlertName/>
<AlertDescription/>
<AlertOwner/>
<AlertMessageId>$MPElement[Name="Microsoft.MSMQ.6.2.Rule.Alert.Event2197.AlertMessage"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/EventDescription$</AlertParameter1>
</AlertParameters>
<Suppression>
<SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>
<SuppressionValue>$Data/LoggingComputer$</SuppressionValue>
</Suppression>
<Custom1/>
<Custom2/>
<Custom3/>
<Custom4/>
<Custom5/>
<Custom6/>
<Custom7/>
<Custom8/>
<Custom9/>
<Custom10/>
</WriteAction>
</WriteActions>
</Rule>