Home
  •  

MSSQL 2008: 代理程式長時間執行的作業

Microsoft.SQLServer.2008.AgentLongRunningJobsProvider (UnitMonitorType)

此監視器類型會查看所有代理程式作業目前的執行時間，是否符合指定的時間臨界值。

Element properties:

RunAsDefault
AccessibilityInternal
Support Monitor RecalculateFalse

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource Microsoft.SQLServer.2008.AgentLongRunningJobs Default
CDOverThreshold1UnderThreshold2 ConditionDetection System.ExpressionFilter Default
CDOverThreshold2 ConditionDetection System.ExpressionFilter Default
CDUnderThreshold1 ConditionDetection System.ExpressionFilter Default

Overrideable Parameters:

IDParameterTypeSelectorDisplay NameDescription
IntervalSecondsint$Config/IntervalSeconds$間隔 (秒)此監視器會使用指令碼來監視長期執行的作業。這是該指令碼執行的間隔時間 (秒)。
SyncTimestring$Config/SyncTime$同步處理時間使用 24 小時制指定的同步處理時間。可以予以省略。
Threshold1double$Config/Threshold1$臨界值下限 (分鐘)此監視的下限臨界值 (分鐘)。根據預設，超過此臨界值將導致監視變更成 (至少為) 警告狀態。
Threshold2double$Config/Threshold2$臨界值上限 (分鐘)此監視的上限臨界值 (分鐘)。根據預設，超過此臨界值將導致監視變更為重大狀態。若介於此臨界值和下限臨界值 (含) 之間，將導致 (預設) 監視進入警告狀態。
TimeoutSecondsint$Config/TimeoutSeconds$逾時 (秒)允許指令碼執行的時間長度 (以秒為單位)。

Source Code:

<UnitMonitorType ID="Microsoft.SQLServer.2008.AgentLongRunningJobsProvider" Accessibility="Internal">

  <MonitorTypeStates>

    <MonitorTypeState ID="UnderThreshold1"/>

    <MonitorTypeState ID="OverThreshold1UnderThreshold2"/>

    <MonitorTypeState ID="OverThreshold2"/>

  </MonitorTypeStates>

  <Configuration>

    <xsd:element xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="IntervalSeconds" type="xsd:integer"/>

    <xsd:element xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="SyncTime" type="xsd:string"/>

    <xsd:element xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="ConnectionString" type="xsd:string"/>

    <xsd:element xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="Threshold1" type="xsd:double"/>

    <xsd:element xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="Threshold2" type="xsd:double"/>

    <xsd:element xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="TimeoutSeconds" type="xsd:int"/>

  </Configuration>

  <OverrideableParameters>

    <OverrideableParameter ID="IntervalSeconds" ParameterType="int" Selector="$Config/IntervalSeconds$"/>

    <OverrideableParameter ID="SyncTime" ParameterType="string" Selector="$Config/SyncTime$"/>

    <OverrideableParameter ID="Threshold1" ParameterType="double" Selector="$Config/Threshold1$"/>

    <OverrideableParameter ID="Threshold2" ParameterType="double" Selector="$Config/Threshold2$"/>

    <OverrideableParameter ID="TimeoutSeconds" ParameterType="int" Selector="$Config/TimeoutSeconds$"/>

  </OverrideableParameters>

  <MonitorImplementation>

    <MemberModules>

      <DataSource TypeID="Microsoft.SQLServer.2008.AgentLongRunningJobs" ID="DS">

        <IntervalSeconds>$Config/IntervalSeconds$</IntervalSeconds>

        <SyncTime>$Config/SyncTime$</SyncTime>

        <ConnectionString>$Config/ConnectionString$</ConnectionString>

        <TimeoutSeconds>$Config/TimeoutSeconds$</TimeoutSeconds>

      </DataSource>

      <ConditionDetection ID="CDUnderThreshold1" TypeID="System!System.ExpressionFilter">

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="Double">Property[@Name='MaxJobDuration']</XPathQuery>

            </ValueExpression>

            <Operator>Less</Operator>

            <ValueExpression>

              <Value Type="Double">$Config/Threshold1$</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

      </ConditionDetection>

      <ConditionDetection ID="CDOverThreshold1UnderThreshold2" TypeID="System!System.ExpressionFilter">

        <Expression>

          <And>

            <Expression>

              <SimpleExpression>

                <ValueExpression>

                  <XPathQuery Type="Double">Property[@Name='MaxJobDuration']</XPathQuery>

                </ValueExpression>

                <Operator>GreaterEqual</Operator>

                <ValueExpression>

                  <Value Type="Double">$Config/Threshold1$</Value>

                </ValueExpression>

              </SimpleExpression>

            </Expression>

            <Expression>

              <SimpleExpression>

                <ValueExpression>

                  <XPathQuery Type="Double">Property[@Name='MaxJobDuration']</XPathQuery>

                </ValueExpression>

                <Operator>LessEqual</Operator>

                <ValueExpression>

                  <Value Type="Double">$Config/Threshold2$</Value>

                </ValueExpression>

              </SimpleExpression>

            </Expression>

          </And>

        </Expression>

      </ConditionDetection>

      <ConditionDetection ID="CDOverThreshold2" TypeID="System!System.ExpressionFilter">

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="Double">Property[@Name='MaxJobDuration']</XPathQuery>

            </ValueExpression>

            <Operator>Greater</Operator>

            <ValueExpression>

              <Value Type="Double">$Config/Threshold2$</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

      </ConditionDetection>

    </MemberModules>

    <RegularDetections>

      <RegularDetection MonitorTypeStateID="UnderThreshold1">

        <Node ID="CDUnderThreshold1">

          <Node ID="DS"/>

        </Node>

      </RegularDetection>

      <RegularDetection MonitorTypeStateID="OverThreshold1UnderThreshold2">

        <Node ID="CDOverThreshold1UnderThreshold2">

          <Node ID="DS"/>

        </Node>

      </RegularDetection>

      <RegularDetection MonitorTypeStateID="OverThreshold2">

        <Node ID="CDOverThreshold2">

          <Node ID="DS"/>

        </Node>

      </RegularDetection>

    </RegularDetections>

  </MonitorImplementation>

</UnitMonitorType>