Home
  •  

Table error: Wrong PageId in the page header

Microsoft.SQLServer.2008.Table_error__Wrong_PageId_in_the_page_header_1_5_Rule (Rule)

Knowledge Base article:

Causes

DBCC asked for page P_ID1. When the page was read from disk, the page ID in its header was found to be P_ID2.

Resolutions

HARDWARE FAILURE

Run hardware diagnostics and correct all revealed problems. Also, examine the Microsoft Windows NT system and application logs, and the SQL Server error log to see if the error occurred as a result of a hardware failure. Fix any hardware-related problems.

If you have persistent data inconsistency problems, try to swap out different hardware components to isolate the problem. Check that your system does not have write caching enabled on the disk controller. If you suspect this to be the case, contact your hardware vendor.

Finally, you might find it beneficial to switch to a completely new hardware system, including reformatting the disk drives and reinstalling the operating system.

RESTORE FROM BACKUP

If the problem is not hardware related and a known clean backup is available, restore the database from the backup.

DBCC CHECKDB

If no clean backup is available, execute DBCC CHECKDB without a repair clause to determine the extent of the corruption. DBCC CHECKDB will recommend a repair clause to use. Then, execute DBCC CHECKDB with the appropriate repair clause to repair the corruption.

CAUTION: If you are unsure what effect DBCC CHECKDB with a repair clause has on your data, contact your primary support provider before executing this statement.

If running DBCC CHECKDB with one of the repair clauses does not correct the problem, contact your primary support provider.

Overrideable Parameters

Name

Description

Default Value

Enabled

Enables or disables the workflow.

Yes

Priority

Defines Alert Priority.

1

Severity

Defines Alert Severity.

1

Element properties:

TargetMicrosoft.SQLServer.2008.DBEngine
CategoryEventCollection
EnabledTrue
Event_ID8909
Event Source$Target/Property[Type="SQL!Microsoft.SQLServer.DBEngine"]/ServiceName$
Alert GenerateTrue
Alert SeverityWarning
Alert PriorityNormal
RemotableTrue
Alert Message
Table error: Wrong PageId in the page header
{0}
Event LogApplication
CommentMom2008ID='{2CE14A21-FC4A-4883-A39F-6C64D2867129}';MOM2008GroupID={467ECC75-C5DA-42BD-955C-A73BBB51AF74}

Member Modules:

ID Module Type TypeId RunAs 
_F6DA1507_12AF_11D3_AB21_00A0C98620CE_ DataSource Microsoft.Windows.EventProvider Microsoft.SQLServer.SQLDefaultAccount
GenerateAlert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="Microsoft.SQLServer.2008.Table_error__Wrong_PageId_in_the_page_header_1_5_Rule" Target="SQL2008Core!Microsoft.SQLServer.2008.DBEngine" Enabled="true" ConfirmDelivery="true" Remotable="true" Comment="Mom2008ID='{2CE14A21-FC4A-4883-A39F-6C64D2867129}';MOM2008GroupID={467ECC75-C5DA-42BD-955C-A73BBB51AF74}">

  <Category>EventCollection</Category>

  <DataSources>

    <DataSource ID="_F6DA1507_12AF_11D3_AB21_00A0C98620CE_" Comment="{F6DA1507-12AF-11D3-AB21-00A0C98620CE}" TypeID="Windows!Microsoft.Windows.EventProvider" RunAs="SQL!Microsoft.SQLServer.SQLDefaultAccount">

      <ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>

      <LogName>Application</LogName>

      <Expression>

        <And>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value>$Target/Property[Type="SQL!Microsoft.SQLServer.DBEngine"]/ServiceName$</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery>EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value>8909</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>1</Severity>

      <AlertMessageId>$MPElement[Name="Microsoft.SQLServer.2008.Table_error__Wrong_PageId_in_the_page_header_1_5_Rule.AlertMessage"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>Event ID: $Data/EventDisplayNumber$. $Data/EventDescription$</AlertParameter1>

      </AlertParameters>

      <Suppression>

        <SuppressionValue/>

      </Suppression>

    </WriteAction>

  </WriteActions>

</Rule>