Home
  •  

DHCP 2012 IPv6 Runtime Initialization Failed Monitor

Microsoft.Windows.DHCPServer.2012.IPv6Runtime.InitializationFailed (UnitMonitor)

This monitor checks for any error during IPV6 runtime initialization process

Knowledge Base article:

Summary

When the Dynamic Host Configuration Protocol (DHCP) Server service initializes, it checks for proper configuration of Transmission Control Protocol/Internet Protocol (TCP/IP) for DHCPv6, including the presence of a static IPv6 address. Successful initialization results when the DHCPv6 server has established network communication by using TCP/IP.

Causes

The DHCP service failed to initialize. The server cannot initialize until it has a static IPv6 address configured and proper configuration parameters. Client computers cannot obtain new leases from the DHCP server and will not have network connectivity.

Resolutions

Resolution: Restart the DHCP Server service

To perform these procedures, you must be a member of the Administrators group, or you must have been delegated the appropriate authority.

To restart the DHCP Server service:

• At the DHCP server computer, click Start, click Run, type services.msc, and then click OK.

• Double-click DHCP Server.

• On the General tab, click Stop, and then click Start.

• On the File menu, click Exit.

Element properties:

TargetMicrosoft.Windows.DHCPServer.2012.IPv6Runtime
Parent MonitorSystem.Health.AvailabilityState
CategoryStateCollection
EnabledTrue
Alert GenerateTrue
Alert SeverityMatchMonitorHealth
Alert PriorityNormal
Alert Auto ResolveTrue
Monitor TypeMicrosoft.Windows.SingleEventLogManualReset2StateMonitorType
RemotableTrue
AccessibilityPublic
Alert Message
DHCP 2012 IPv6 Runtime Initialization Failed Monitor
{0}
RunAsDefault

Source Code:

<UnitMonitor ID="Microsoft.Windows.DHCPServer.2012.IPv6Runtime.InitializationFailed" Accessibility="Public" Enabled="true" Target="Microsoft.Windows.DHCPServer.2012.IPv6Runtime" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Windows!Microsoft.Windows.SingleEventLogManualReset2StateMonitorType" ConfirmDelivery="true">

  <Category>StateCollection</Category>

  <AlertSettings AlertMessage="Microsoft.Windows.DHCPServer.2012.IPv6Runtime.InitializationFailed_AlertMessageResourceID">

    <AlertOnState>Warning</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Data/Context/EventDescription$</AlertParameter1>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="EventRaised" MonitorTypeStateID="EventRaised" HealthState="Warning"/>

    <OperationalState ID="ManualResetEventRaised" MonitorTypeStateID="ManualResetEventRaised" HealthState="Success"/>

  </OperationalStates>

  <Configuration>

    <ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</ComputerName>

    <LogName>System</LogName>

    <Expression>

      <And>

        <Expression>

          <Or>

            <Expression>

              <SimpleExpression>

                <ValueExpression>

                  <XPathQuery Type="String">PublisherName</XPathQuery>

                </ValueExpression>

                <Operator>Equal</Operator>

                <ValueExpression>

                  <Value Type="String">Microsoft-Windows-DHCP-Server</Value>

                </ValueExpression>

              </SimpleExpression>

            </Expression>

            <Expression>

              <SimpleExpression>

                <ValueExpression>

                  <XPathQuery Type="String">PublisherName</XPathQuery>

                </ValueExpression>

                <Operator>Equal</Operator>

                <ValueExpression>

                  <Value Type="String">DHCPServer</Value>

                </ValueExpression>

              </SimpleExpression>

            </Expression>

          </Or>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="UnsignedInteger">10111</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

      </And>

    </Expression>

  </Configuration>

</UnitMonitor>