DFS-R: Configuration Validity

Microsoft.Windows.FileServer.DFSR.InconsistentConfigMonitor (UnitMonitor)

This object monitors the replication group configuration information received from Active Directory Domain Services (AD DS) and creates a Warning alert if the replication group configuration is incomplete or references an object that doesn’t exist.

Knowledge Base article:

Summary

This object monitors the replication group configuration information received from Active Directory Domain Services (AD DS), and creates a Warning alert if the replication group configuration is incomplete or references an object that doesn’t exist. It does so by looking for the presence of DFS Replication Event 6606.

Causes

An unhealthy state of this monitor indicates that DFS Replication detected replication group configuration that is incomplete or references an object that doesn’t exist. This is a rare event that can occur for the following reasons:

Resolutions

Wait for configuration changes to replicate with AD DS

DFS Replication will retry this operation, which usually resolves automatically after configuration changes replicate through AD DS.

To poll immediately for configuration changes, open a command prompt window and then type the following command once for each member of the replication group, where [domain] is the domain the server is located in and [server] is the server name: Dfsrdiag PollAD /Member:[domain\server]

If this problem persists, verify that AD DS replication is working and that the service is able to reach a domain controller. If the problem persists for 8 hours, the DFS Replication service will disable the connection and log DFS Replication Event 5016.

Verification

This monitor automatically resets to a healthy state after the problem is resolved and DFS Replication Event 6014 is detected or the DFS Replication service is restarted.

To manually verify the replication topology, see Repair a Disconnected Topology (http://go.microsoft.com/fwlink/?LinkId=187103).

Additional

Element properties:

TargetMicrosoft.Windows.FileServer.DFSR.ReplicationGroupMember
Parent MonitorSystem.Health.ConfigurationState
CategoryStateCollection
EnabledTrue
Alert GenerateTrue
Alert SeverityWarning
Alert PriorityNormal
Alert Auto ResolveTrue
Monitor TypeMicrosoft.Windows.2SingleEventLog2StateMonitorType
RemotableTrue
AccessibilityPublic
Alert Message
DFS-R: Incomplete Replication Group Configuration Deleted

DFS Replication detected replication group configuration that is incomplete or references an object that doesn't exist. The configuration information was deleted and will be reloaded from AD DS.
Additional Information:
Error: {0} ({1})
Replication Group Name: {2}
Replication Group ID: {3}
Object ID: {4}
Object Type: {5}
RunAsDefault

Source Code:

<UnitMonitor ID="Microsoft.Windows.FileServer.DFSR.InconsistentConfigMonitor" Accessibility="Public" Enabled="true" Target="Microsoft.Windows.FileServer.DFSR.ReplicationGroupMember" ParentMonitorID="Health!System.Health.ConfigurationState" Remotable="true" Priority="Normal" TypeID="Windows!Microsoft.Windows.2SingleEventLog2StateMonitorType" ConfirmDelivery="true">
<Category>StateCollection</Category>
<AlertSettings AlertMessage="Microsoft.Windows.FileServer.DFSR.InconsistentConfigMonitor_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Warning</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/Params/Param[2]$</AlertParameter1>
<AlertParameter2>$Data/Context/Params/Param[3]$</AlertParameter2>
<AlertParameter3>$Data/Context/Params/Param[4]$</AlertParameter3>
<AlertParameter4>$Data/Context/Params/Param[1]$</AlertParameter4>
<AlertParameter5>$Data/Context/Params/Param[5]$</AlertParameter5>
<AlertParameter6>$Data/Context/Params/Param[6]$</AlertParameter6>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="FirstEventRaised" MonitorTypeStateID="FirstEventRaised" HealthState="Warning"/>
<OperationalState ID="SecondEventRaised" MonitorTypeStateID="SecondEventRaised" HealthState="Success"/>
</OperationalStates>
<Configuration>
<FirstComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</FirstComputerName>
<FirstLogName>DFS Replication</FirstLogName>
<FirstExpression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">6606</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">DFSR</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[1]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="Microsoft.Windows.FileServer.DFSR.ReplicationGroupMember"]/ReplicationGroupGUID$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</FirstExpression>
<SecondComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</SecondComputerName>
<SecondLogName>DFS Replication</SecondLogName>
<SecondExpression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">DFSR</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">1004</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">1104</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[1]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="Microsoft.Windows.FileServer.DFSR.ReplicationGroupMember"]/ReplicationGroupGUID$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">3002</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">3004</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">3006</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">6608</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</Expression>
</And>
</Expression>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">9111</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Params/Param[6]</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="Microsoft.Windows.FileServer.DFSR.ReplicationGroupMember"]/ReplicationGroupGUID$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</Or>
</Expression>
</And>
</SecondExpression>
</Configuration>
</UnitMonitor>