論理ディスク上のファイル システムでエラーまたは破損が発生していないかどうかを監視します。
NTFS が、論理ディスクが破損しているか、まったく使用できないことを報告しました。ボリュームに格納されている一部のデータにアクセスできない可能性があります。
論理ディスクが破損、またはアクセス不能になる原因は多数ありますが、主に次のことが考えられます。
論理ディスクに関連付けられている物理ディスクが取り外されたか、エラーが発生している
論理ディスクに関連付けられている物理ディスクが破損しているか (不良セクターなど)、操作不能である
ディスク ドライバーで問題が発生している
障害がないか、ハードウェアの状態を確認します (ディスク、コントローラー、またはケーブルの障害など)。ほとんどの場合、システム ログには、エラーの原因を示す、下位の記憶装置ドライバーからの他のイベントが含まれています。
ハードウェアの問題を特定し、解決した後、次の手順を実行します。
1. ディスク管理スナップインを開きます。
2. ディスクを再スキャンし、エラーが発生したディスクを再アクティブ化します。
ディスクがミラー ボリュームまたは RAID-5 ボリュームのメンバーだった場合は、必要に応じてボリュームを再同期または再生成します。
3. 再アクティブ化したボリュームで chkdsk を実行します。
Target | Microsoft.Windows.Server.10.0.LogicalDisk | ||
Parent Monitor | System.Health.AvailabilityState | ||
Category | StateCollection | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | Microsoft.Windows.Server.10.0.LogicalDisk.Monitortype | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="Microsoft.Windows.Server.10.0.LogicalDisk.AvailabilityHealth" Accessibility="Public" Enabled="true" Target="ServervNext!Microsoft.Windows.Server.10.0.LogicalDisk" ParentMonitorID="SystemHealth!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Microsoft.Windows.Server.10.0.LogicalDisk.Monitortype" ConfirmDelivery="false">
<Category>StateCollection</Category>
<AlertSettings AlertMessage="Microsoft.Windows.Server.10.0.LogicalDisk.AvailabilityHealth.AlertMessage">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="Windows!Microsoft.Windows.LogicalDevice"]/Name$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="NotAvailabile" MonitorTypeStateID="Bad" HealthState="Error"/>
<OperationalState ID="Availabile" MonitorTypeStateID="Good" HealthState="Success"/>
</OperationalStates>
<Configuration>
<IntervalSeconds>3600</IntervalSeconds>
<TargetComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</TargetComputerName>
<DiskLabel>$Target/Property[Type="Windows!Microsoft.Windows.LogicalDevice"]/DeviceID$</DiskLabel>
<TimeoutSeconds>300</TimeoutSeconds>
</Configuration>
</UnitMonitor>