Home
  •  

Multicast failure

Multicast_failure_1_Rule (Rule)

Knowledge Base article:

Management Pack
Summary
The Routing and Remote Access service encountered a problem in multicasting.
 
Causes
The most common reasons for this warning are:
  1. Multicast scope name mismatch.
  2. Multicast scope address range mismatch.
  3. A possible multicast scope leak detected.
  4. A multicast scope leak detected.
  5. Multicast scope is non-convex.
 
Resolutions
Open Routing and Remote Access and verify that
  1. Multicast scope name matches.
  2. Multicast scope address range matches.
  3. Check the event Event Viewer for the routers that could be wrongly configured.
  4. The border router is not outside.
 
© 2004 Microsoft Corporation, all rights reserved.

Element properties:

TargetMicrosoft.Windows.RemoteAccess.2012.Class.VPNServer
CategoryEventCollection
EnabledTrue
Event SourceRemoteAccess
Alert GenerateFalse
RemotableTrue
Event LogSystem

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource Microsoft.Windows.EventProvider Default
WriteToDB WriteAction Microsoft.SystemCenter.CollectEvent Default

Source Code:

<Rule ID="Multicast_failure_1_Rule" Enabled="true" Target="Microsoft.Windows.RemoteAccess.2012.Class.VPNServer" ConfirmDelivery="true" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>EventCollection</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>

      <LogName>System</LogName>

      <Expression>

        <And>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>MatchesRegularExpression</Operator>

              <Pattern>^(20157|20172|20173|20174|20175|20176)$</Pattern>

            </RegExExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">RemoteAccess</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="WriteToDB" TypeID="SystemCenter!Microsoft.SystemCenter.CollectEvent"/>

  </WriteActions>

</Rule>