Monitor REC_FAILED_VOLUME_MULTI_RAID (18)

NetAppESeries.FailureID_0018_Monitor (UnitMonitor)

A volume group has
been marked failed due to excessive drive failures. This failure
code is used for volume groups containing volumes with different
RAID levels. It is not supported in the current release of the
firmware.

Knowledge Base article:

Unknown Failure Type

What Caused the Problem?

The failure type cannot be determined.

Recovery Steps

Open the Event Log for this storage array by selecting Monitor > Reports > Event Log in the Array Management Window. Look for any recent entries indicating the nature of the failure.

Check the storage array for fault indicator lights or other signs of failures.

If...

Then...

There are no indications of failures

You can ignore this failure.

You suspect a failure

Click the

Recheck

button to rerun the Recovery Guru. The failure should no longer appear in the Summary area. If the failure appears again, contact your Technical Support Representative.

Element properties:

Target

NetAppESeries.StorageArray

Parent Monitor

NetAppESeries.StorageArrayAvailability

Category

Custom

Enabled

True

Alert Generate

True

Alert Severity

Error

Alert Priority

Normal

Alert Auto Resolve

True

Monitor Type

NetAppESeries.FailureUnitMonitorType

Remotable

True

Accessibility

Internal

Alert Message

Alert: REC_FAILED_VOLUME_MULTI_RAID

RunAs

Default

Comment

Machine generated entity

Source Code:

<UnitMonitor ID="NetAppESeries.FailureID_0018_Monitor" Accessibility="Internal" Enabled="true" Target="NetAppESeries.StorageArray" ParentMonitorID="NetAppESeries.StorageArrayAvailability" Remotable="true" Priority="Normal" TypeID="NetAppESeries.FailureUnitMonitorType" ConfirmDelivery="true" Comment="Machine generated entity">

  <Category>Custom</Category>

  <AlertSettings AlertMessage="NetAppESeries.REC_FAILED_VOLUME_MULTI_RAID_AlertMessageResourceID">

    <AlertOnState>Error</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>Error</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Data/Context/Property[@Name='FailureDescription']$</AlertParameter1>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="NetAppESeries.StateIdA9850D5CAF5844E37610A077A9A1C589" MonitorTypeStateID="NoIssue" HealthState="Success"/>

    <OperationalState ID="NetAppESeries.StateId51BE876E009AA66473F18618C68D9EF2" MonitorTypeStateID="IssueFound" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <FailureID>18</FailureID>

    <IntervalSeconds>59</IntervalSeconds>

    <TimeoutSeconds>300</TimeoutSeconds>

    <Trace>0</Trace>

  </Configuration>

</UnitMonitor>