Home
  •  

Monitor REC_IMPAIRED_VOLUME (19)

NetAppESeries.FailureID_0019_Monitor (UnitMonitor)

The failure type is Impaired Volume.

Knowledge Base article:

Unknown Failure Type

What Caused the Problem?

The failure type cannot be determined.

Recovery Steps

1

Open the Event Log for this storage array by selecting Monitor > Reports > Event Log in the Array Management Window. Look for any recent entries indicating the nature of the failure.

2

Check the storage array for fault indicator lights or other signs of failures.

If...

Then...

There are no indications of failures

You can ignore this failure.

You suspect a failure

Click the

Recheck

button to rerun the Recovery Guru. The failure should no longer appear in the Summary area. If the failure appears again, contact your Technical Support Representative.

Element properties:

TargetNetAppESeries.StorageArray
Parent MonitorNetAppESeries.StorageArrayAvailability
CategoryCustom
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityNormal
Alert Auto ResolveTrue
Monitor TypeNetAppESeries.FailureUnitMonitorType
RemotableTrue
AccessibilityInternal
Alert Message
Alert: REC_IMPAIRED_VOLUME
The failure type is Impaired Volume. Alert Value: {0}
RunAsDefault
CommentMachine generated entity

Source Code:

<UnitMonitor ID="NetAppESeries.FailureID_0019_Monitor" Accessibility="Internal" Enabled="true" Target="NetAppESeries.StorageArray" ParentMonitorID="NetAppESeries.StorageArrayAvailability" Remotable="true" Priority="Normal" TypeID="NetAppESeries.FailureUnitMonitorType" ConfirmDelivery="true" Comment="Machine generated entity">

  <Category>Custom</Category>

  <AlertSettings AlertMessage="NetAppESeries.REC_IMPAIRED_VOLUME_AlertMessageResourceID">

    <AlertOnState>Error</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>Error</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Data/Context/Property[@Name='FailureDescription']$</AlertParameter1>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="NetAppESeries.StateId82E289274BBAC88CEF161A0D9DB1865" MonitorTypeStateID="NoIssue" HealthState="Success"/>

    <OperationalState ID="NetAppESeries.StateId456A79011422AD2CB92A525D7B23F6A" MonitorTypeStateID="IssueFound" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <FailureID>19</FailureID>

    <IntervalSeconds>59</IntervalSeconds>

    <TimeoutSeconds>300</TimeoutSeconds>

    <Trace>0</Trace>

  </Configuration>

</UnitMonitor>