Determine the state of each membership partition. Open the Configure Matrix window and go to the Storage Settings tab, which shows the state of each membership partition. If a single membership partition is corrupt, use the Repair feature to resilver the partition while the matrix is online. If two partitions are corrupt, shut down the matrix on all nodes and then resilver the partitions. If all of the membership partitions are corrupt, you will need to restore the partitions from a backup. If the state for a partition is NOT FOUND or INACCESSIBLE, there may be a problem with the disk containing the partitions or with another SAN component. When the problem is repaired, the status should return to OK.