State of the ATS front panel - Monitor

SCUtils.APC.ATS.Monitor.atsStatusFrontPanel (UnitMonitor)

This variable returns the present state of the ATS front panel.

Knowledge Base article:

Summary

This monitor returns the present state of the ATS front panel.

locked(1):Front panel button cannot be used to change the sources.
unlocked(2):Front panel button can be used to change the sources.

Causes

If Front panel button cannot be used to change the sources, an alarm occurs.

Resolutions

Please use the APC web interface for the more detailed information.

Element properties:

Target

SCUtils.APC.ATS

Parent Monitor

System.Health.AvailabilityState

Category

AvailabilityHealth

Enabled

True

Alert Generate

True

Alert Severity

MatchMonitorHealth

Alert Priority

Normal

Alert Auto Resolve

True

Monitor Type

SCUtils.APC.ATS.MonitorType.Advanced.StatusProbe

Remotable

True

Accessibility

Public

Alert Message

The present state of the ATS front panel

The present state of the ATS front panel

Name: {0}
Location: {1}
Primary Owner: {2}
IP : {3}
Value : {4}

Legend:
locked (1)
unlocked (2)

RunAs

Default

Source Code:

<UnitMonitor ID="SCUtils.APC.ATS.Monitor.atsStatusFrontPanel" Accessibility="Public" Enabled="true" Target="SCUtils.APC.ATS" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="SCUtils.APC.ATS.MonitorType.Advanced.StatusProbe" ConfirmDelivery="true">

  <Category>AvailabilityHealth</Category>

  <AlertSettings AlertMessage="SCUtils.APC.ATS.Monitor.atsStatusFrontPanel_AlertMessageResourceID">

    <AlertOnState>Error</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/sysName$</AlertParameter1>

      <AlertParameter2>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/Location$</AlertParameter2>

      <AlertParameter3>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/PrimaryOwnerContact$</AlertParameter3>

      <AlertParameter4>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</AlertParameter4>

      <AlertParameter5>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter5>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="SCUtils.APC.ATS.Monitor.atsStatusFrontPanel.Success" MonitorTypeStateID="StatusOK" HealthState="Success"/>

    <OperationalState ID="SCUtils.APC.ATS.Monitor.atsStatusFrontPanel.Error" MonitorTypeStateID="StatusNotOK" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <IntervalSeconds>300</IntervalSeconds>

    <IPAddress>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IPAddress>

    <CommunityString>$RunAs[Name="NetworkLibrary!System.NetworkManagement.Snmp.MonitoringAccount"]/CommunityString$</CommunityString>

    <SnmpVersion>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPVersion$</SnmpVersion>

    <OID>.1.3.6.1.4.1.318.1.1.8.5.1.11</OID>

    <Index>0</Index>

    <Walk>true</Walk>

    <ErrorValueRegEx>(1)</ErrorValueRegEx>

  </Configuration>

</UnitMonitor>