Current source of power - Monitor

SCUtils.APC.ATS.Monitor.atsStatusSelectedSource (UnitMonitor)

The current source of power. SourceA=1, SourceB=2

Knowledge Base article:

Summary

This monitor returns the current source of power.

Source A (1)
Source B (2)

Causes

If the current source of power - Source B, an alarm occurs.

Resolutions

Please use the APC web interface for the more detailed information.

Element properties:

Target

SCUtils.APC.ATS

Parent Monitor

System.Health.AvailabilityState

Category

AvailabilityHealth

Enabled

True

Alert Generate

True

Alert Severity

MatchMonitorHealth

Alert Priority

Normal

Alert Auto Resolve

True

Monitor Type

SCUtils.APC.ATS.MonitorType.Advanced.StatusProbe

Remotable

True

Accessibility

Public

Alert Message

ATS current source of power

The current source of power

Name: {0}
Location: {1}
Primary Owner: {2}
IP : {3}
Value : {4}

Legend:
SourceA (1)
SourceB (2)

RunAs

Default

Source Code:

<UnitMonitor ID="SCUtils.APC.ATS.Monitor.atsStatusSelectedSource" Accessibility="Public" Enabled="true" Target="SCUtils.APC.ATS" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="SCUtils.APC.ATS.MonitorType.Advanced.StatusProbe" ConfirmDelivery="true">

  <Category>AvailabilityHealth</Category>

  <AlertSettings AlertMessage="SCUtils.APC.ATS.Monitor.atsStatusSelectedSource_AlertMessageResourceID">

    <AlertOnState>Error</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/sysName$</AlertParameter1>

      <AlertParameter2>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/Location$</AlertParameter2>

      <AlertParameter3>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/PrimaryOwnerContact$</AlertParameter3>

      <AlertParameter4>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</AlertParameter4>

      <AlertParameter5>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter5>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="SCUtils.APC.ATS.Monitor.atsStatusSelectedSource.Success" MonitorTypeStateID="StatusOK" HealthState="Success"/>

    <OperationalState ID="SCUtils.APC.ATS.Monitor.atsStatusSelectedSource.Error" MonitorTypeStateID="StatusNotOK" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <IntervalSeconds>300</IntervalSeconds>

    <IPAddress>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IPAddress>

    <CommunityString>$RunAs[Name="NetworkLibrary!System.NetworkManagement.Snmp.MonitoringAccount"]/CommunityString$</CommunityString>

    <SnmpVersion>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPVersion$</SnmpVersion>

    <OID>.1.3.6.1.4.1.318.1.1.8.5.1.2</OID>

    <Index>0</Index>

    <Walk>true</Walk>

    <ErrorValueRegEx>(2)</ErrorValueRegEx>

  </Configuration>

</UnitMonitor>