Home
  •  

Status of the Source B - Monitor

SCUtils.APC.ATS.Monitor.atsStatusSourceBStatus (UnitMonitor)

This variable returns the status of the Source B.

Knowledge Base article:

Summary

This monitor returns the status of the Source B.

Causes

If this variable returns the status of the Source B - Fail, an alarm occurs.

Resolutions

Please use the APC web interface for the more detailed information.

Element properties:

TargetSCUtils.APC.ATS
Parent MonitorSystem.Health.AvailabilityState
CategoryAvailabilityHealth
EnabledTrue
Alert GenerateTrue
Alert SeverityMatchMonitorHealth
Alert PriorityNormal
Alert Auto ResolveTrue
Monitor TypeSCUtils.APC.ATS.MonitorType.Advanced.StatusProbe
RemotableTrue
AccessibilityPublic
Alert Message
The status of the Source B.

The status of the Source B.

Name: {0}
Location: {1}
Primary Owner: {2}
IP : {3}
Value : {4}

Legend:
Fail (1)
OK (2)
RunAsDefault

Source Code:

<UnitMonitor ID="SCUtils.APC.ATS.Monitor.atsStatusSourceBStatus" Accessibility="Public" Enabled="true" Target="SCUtils.APC.ATS" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="SCUtils.APC.ATS.MonitorType.Advanced.StatusProbe" ConfirmDelivery="true">

  <Category>AvailabilityHealth</Category>

  <AlertSettings AlertMessage="SCUtils.APC.ATS.Monitor.atsStatusSourceBStatus_AlertMessageResourceID">

    <AlertOnState>Error</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>MatchMonitorHealth</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/sysName$</AlertParameter1>

      <AlertParameter2>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/Location$</AlertParameter2>

      <AlertParameter3>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/PrimaryOwnerContact$</AlertParameter3>

      <AlertParameter4>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</AlertParameter4>

      <AlertParameter5>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter5>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="SCUtils.APC.ATS.Monitor.atsStatusSourceBStatus.Success" MonitorTypeStateID="StatusOK" HealthState="Success"/>

    <OperationalState ID="SCUtils.APC.ATS.Monitor.atsStatusSourceBStatus.Error" MonitorTypeStateID="StatusNotOK" HealthState="Error"/>

  </OperationalStates>

  <Configuration>

    <IntervalSeconds>300</IntervalSeconds>

    <IPAddress>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IPAddress>

    <CommunityString>$RunAs[Name="NetworkLibrary!System.NetworkManagement.Snmp.MonitoringAccount"]/CommunityString$</CommunityString>

    <SnmpVersion>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPVersion$</SnmpVersion>

    <OID>.1.3.6.1.4.1.318.1.1.8.5.1.13</OID>

    <Index>0</Index>

    <Walk>true</Walk>

    <ErrorValueRegEx>(1)</ErrorValueRegEx>

  </Configuration>

</UnitMonitor>