UPS Number Of Bad Battery Packs

SCUtils.APC.UPS.Monitor.ups.AdvBatteryNumOfBadBattPacks (UnitMonitor)

The number of external battery packs connected to the UPS that are defective. If the UPS does not use smart cells then the agent reports ERROR_NO_SUCH_NAME.

Element properties:

Source Code:

<UnitMonitor ID="SCUtils.APC.UPS.Monitor.ups.AdvBatteryNumOfBadBattPacks" Accessibility="Public" Enabled="true" Target="SCUtils.APC.UPS" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="SCUtils.APC.UPS.Monitor.Type.StatusProbe" ConfirmDelivery="true">

  <Category>AvailabilityHealth</Category>

  <AlertSettings AlertMessage="SCUtils.APC.UPS.Monitor.ups.AdvBatteryNumOfBadBattPacks_AlertMessageResourceID">

    <AlertOnState>Warning</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>Warning</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/sysName$</AlertParameter1>

      <AlertParameter2>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/Location$</AlertParameter2>

      <AlertParameter3>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/PrimaryOwnerContact$</AlertParameter3>

      <AlertParameter4>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</AlertParameter4>

      <AlertParameter5>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter5>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="SCUtils.APC.UPS.Monitor.ups.AdvBatteryNumOfBadBattPacks.Success" MonitorTypeStateID="StatusOK" HealthState="Success"/>

    <OperationalState ID="SCUtils.APC.UPS.Monitor.ups.AdvBatteryNumOfBadBattPacks.Error" MonitorTypeStateID="StatusNotOK" HealthState="Warning"/>

  </OperationalStates>

  <Configuration>

    <IntervalSeconds>1200</IntervalSeconds>

    <IPAddress>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IPAddress>

    <CommunityString>$RunAs[Name="NetworkLibrary!System.NetworkManagement.Snmp.MonitoringAccount"]/CommunityString$</CommunityString>

    <SnmpVersion>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPVersion$</SnmpVersion>

    <OID>.1.3.6.1.4.1.318.1.1.1.2.2.6.0</OID>

    <ErrorValueRegEx>(^[1-9]+)</ErrorValueRegEx>

  </Configuration>

</UnitMonitor>