UPS Alert trap Rule - An Environmental Monitor temperature threshold violation has been cleared on probe 1

SCUtils.APC.UPS.Trap.Rule.temperatureThresholdViolationCleared1 (Rule)

Knowledge Base article:

Summary

SNMP Trap from APC UPS

Causes

An Environmental Monitor temperature threshold violation has been cleared on probe 1.

Resolutions

Please use the APC web interface for more detailed information.

Element properties:

TargetSCUtils.APC.UPS
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityInformation
Alert PriorityLow
RemotableTrue
Alert Message
UPS Alert trap Rule - An Environmental Monitor temperature threshold violation has been cleared on probe 1

An Environmental Monitor temperature threshold violation has been cleared on probe 1

Source {0}
Location is {1}
IP {2}
Primary owner is {3}

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource System.NetworkManagement.SnmpTrapEventProvider Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="SCUtils.APC.UPS.Trap.Rule.temperatureThresholdViolationCleared1" Enabled="true" Target="SCUtils.APC.UPS" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>Alert</Category>
<DataSources>
<DataSource ID="DS" TypeID="NetworkLibrary!System.NetworkManagement.SnmpTrapEventProvider">
<IP>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IP>
<OIDProps>
<OIDProp>.1.3.6.1.4.1.318.0.60</OIDProp>
</OIDProps>
<EventOriginId>$Target/Id$</EventOriginId>
<PublisherId>$Target/Id$</PublisherId>
<PublisherName>Snmp Event</PublisherName>
<Channel>SnmpEvent</Channel>
<LoggingComputer/>
<EventNumber>1501</EventNumber>
<EventCategory>5</EventCategory>
<EventLevel>10</EventLevel>
<UserName/>
<Params/>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">
<Priority>0</Priority>
<Severity>0</Severity>
<AlertOwner/>
<AlertMessageId>$MPElement[Name="SCUtils.APC.UPS.Trap.Rule.temperatureThresholdViolationCleared1.AlertMessage"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/sysName$</AlertParameter1>
<AlertParameter2>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/Location$</AlertParameter2>
<AlertParameter3>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</AlertParameter3>
<AlertParameter4>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/PrimaryOwnerContact$</AlertParameter4>
</AlertParameters>
<Suppression>
<SuppressionValue/>
</Suppression>
<Custom1/>
<Custom2/>
<Custom3/>
<Custom4/>
<Custom5/>
<Custom6/>
<Custom7/>
<Custom8/>
<Custom9/>
<Custom10/>
</WriteAction>
</WriteActions>
</Rule>