UPS Alert trap Rule - The MPU has been reset

SCUtils.APC.UPS.Trap.Rule.upsMpuReset (Rule)

Knowledge Base article:

Summary

SNMP Trap from APC UPS

Causes

The MPU has been reset.

Resolutions

Please use the APC web interface for more detailed information.

Element properties:

TargetSCUtils.APC.UPS
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityInformation
Alert PriorityLow
RemotableTrue
Alert Message
UPS Alert trap Rule - The MPU has been reset

The MPU has been reset

Source {0}
Location is {1}
IP {2}
Primary owner is {3}

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource System.NetworkManagement.SnmpTrapEventProvider Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="SCUtils.APC.UPS.Trap.Rule.upsMpuReset" Enabled="true" Target="SCUtils.APC.UPS" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>Alert</Category>
<DataSources>
<DataSource ID="DS" TypeID="NetworkLibrary!System.NetworkManagement.SnmpTrapEventProvider">
<IP>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IP>
<OIDProps>
<OIDProp>.1.3.6.1.4.1.318.0.355</OIDProp>
</OIDProps>
<EventOriginId>$Target/Id$</EventOriginId>
<PublisherId>$Target/Id$</PublisherId>
<PublisherName>Snmp Event</PublisherName>
<Channel>SnmpEvent</Channel>
<LoggingComputer/>
<EventNumber>1501</EventNumber>
<EventCategory>5</EventCategory>
<EventLevel>10</EventLevel>
<UserName/>
<Params/>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">
<Priority>0</Priority>
<Severity>0</Severity>
<AlertOwner/>
<AlertMessageId>$MPElement[Name="SCUtils.APC.UPS.Trap.Rule.upsMpuReset.AlertMessage"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/sysName$</AlertParameter1>
<AlertParameter2>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/Location$</AlertParameter2>
<AlertParameter3>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</AlertParameter3>
<AlertParameter4>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/PrimaryOwnerContact$</AlertParameter4>
</AlertParameters>
<Suppression>
<SuppressionValue/>
</Suppression>
<Custom1/>
<Custom2/>
<Custom3/>
<Custom4/>
<Custom5/>
<Custom6/>
<Custom7/>
<Custom8/>
<Custom9/>
<Custom10/>
</WriteAction>
</WriteActions>
</Rule>